Papers by Author: Tamás Réti

Paper TitlePage

Abstract: A study was carried out on Zr-Cr bearing copper electrodes used for resistance spot welding of galvannealed steel strips. One electrode exhibited a series of well-defined layers in which Zn diffused to form β- and γ-brasses; an external layer containing iron was detected in this electrode. Another electrode that exhibited a high degree of damage did not exhibited continuous Zn-diffusion layers in all places, moreover, the Fe-containing layer was either removed, or had it grown to a high extent in some places; the occurrence of Cu-rich particles embedded within the Fe containing layer was observed. Multiple cracks were observed within the γ brass layer in both electrodes. The difference in the observed behaviour of the electrodes can be attributed to a difference in the characteristics of the galvannealed coating of the strips, as the first electrode was used to weld strips in which the layer corresponding to the  phase was well developed, whereas the second electrode was used to weld strips with only an incipient layer. It can be concluded that growth of the  phase changes the thermophysical properties of the zinc coating, affecting the temperature profile during spot welding.
300
Abstract: In several fields of materials science space-filling polyhedral systems are generally used for modeling and characterizing the microstructure of polycrystalline and cellular materials. In this paper a simple quantitative method designated to classify 3D triply periodic, space-filling, cellular systems is outlined. The concept of the proposed method is based on the known analogy between the combinatorial structure of 3D space-filling polyhedral systems and of 4D polytopes. For classification purposes various topological shape indices are defined and tested. It is demonstrated that using two appropriately selected shape factors (asymmetry and compactness coefficients) a global combinatorial classification of cellular systems can be performed.
341
Abstract: The modified Jominy-test was designed for prediction of hardenability of high-hardenability tool steels and possibility of application of modified Jominy-test in computer simulation of quenching of high-hardenability tool steels has been investigated. Because of high hardenability there are limits in application of original Jominy-specimen in simulation of quenching of steels. The performance of investigated modified Jominy-test in simulation of quenching of high-hardenability tool steels was estimated by comparison of cooling curves of modified Jominy-specimen (JM®-specimen) and cylindrical specimen. The influence of dimension of JM®-specimen on cooling curves has been investigated. The time of cooling, t8/5 relevant for results of quenching was predicted. Modified Jominy-test can be applied in simulation of quenching of steel with higher hardenability rather than original Jominy-test.
607
Abstract: In order to simulate the polyhedral grain nucleation in alloys, 3-D cell population growth processes are studied in space-filling periodic cellular systems. We discussed two different methods by which space-filling polyhedral cellular systems can be constructed by topological transformations performed on “stable” 3-D cellular systems. It has been demonstrated that an infinite sequence of stable periodic space-filling polyhedral systems can be generated by means of a simple recursion procedure based on a vertex based tetrahedron insertion. On the basis of computed results it is conjectured that in a 3-D periodic, topologically stable cellular system the minimum value of the average face number 〈f〉 of polyhedral cells is larger than eight (i.e. 〈f〉 > 8). The outlined algorithms (which are based on cell decomposition and/or cell nucleation) provide a new perspective to simulate grain population growth processes in materials with polyhedral microstructure.
579
Abstract: Kinetic models of new types are suggested which are designated primarily to predict the progress of non-isothermal transformations occurring during rapid heating and cooling in alloys. A common feature of each model outlined is that it takes into account not only the varying temperature but also the rate of temperature change on the transformation rate of the process. The two models represented by differential equations are generated by using the concept of virtual kinetic parameters, which can be determined from non-isothermal experiments only. A key property of the virtual parameter "p" involved in the transformation rate equations is that it quantitatively characterizes the temperature rate dependence of the non-isothermal reaction.
571
Abstract: To characterize topologically the polycrystalline microstructure of single-phase alloys computer simulations are performed on 3-dimensional cellular models. These infinite periodic cellular systems are constructed from a finite set of space filling convex polyhedra (grains). It is shown that the appropriately selected topological shape factors can be successfully used for the quantitative characterization of computer-simulated microstructures of various types.
563
Abstract: In recent years, several attempts have been made to characterize the geometric structure of fullerenes by means of topological shape factors in order to predict their physical properties and stability. In this paper, we present a simple method to estimate the stability of fullerenes on the basis of quantitative topological criteria. This approach is based on the concept of the generalized combinatorial curvatures defined on the set of simple graphs embedded on a closed surface without boundary (sphere, torus, projective plane, Klein bottle). It is shown that starting with the computed generalized combinatorial curvatures several novel topological indices can be generated. From computations performed on a set of C40 and C60 fullerenes, we concluded that the four topological shape factors tested (Λ(-1), (-1), Λ(1) and (1)) could be successfully used to preselect the most stable fullerene isomers.
439
Abstract: The microstructure and properties of tool steel parts built by laser powder deposition (LPD) depend considerably on the build-up strategy and on the processing parameters used. This dependence can lead to inconsistent results which may limit the widespread acceptance of LPD. There is, thus, a need for efficient process optimisation tools that take into consideration the complex phase transformations that may occur during the part build-up process and their effect on final properties. A model coupling finite element heat transfer calculations with transformation kinetic theory has been developed, which allows the microstructure and property distributions in parts produced by LPD to be predicted. Application of this model to the deposition of tool steels not only explains the origin of the heterogeneous distribution of properties usually mentioned in the literature but also allows designing build-up strategies that consistently lead to homogeneous, high quality parts. Its application to the study of the influence of substrate pre-heating and idle time between the deposition of consecutive layers is illustrated in the present paper.
739
447
389
Showing 1 to 10 of 20 Paper Titles