Papers by Author: Ulf Garbe

Abstract: In this work we compare and contrast the stability of retained austenite during tensile testing of Nb-Mo-Al transformation-induced plasticity steel subjected to different thermomechanical processing schedules. The obtained microstructures were characterised using optical metallography, transmission electron microscopy and X-ray diffraction. The transformation of retained austenite to martensite under tensile loading was observed by in-situ high energy X-ray diffraction at 1ID / APS. It has been shown that the variations in the microstructure of the steel, such as volume fractions of present phases, their morphology and dimensions, play a critical role in the strain-induced transition of retained austenite to martensite.

Abstract: Kowari is a neutron diffractometer at ANSTO’s research reactor OPAL. The instrument is dedicated to investigate residual strains and stresses in engineering samples or new materials. Besides its usage in engineering/strain-scanning it is more and more frequently being used for obtaining texture information related to materials science applications. In particular the possibility of using the gauge volume defining slit systems allows extracting local information from the diffraction peak, i.e. position, intensity, and width, without the need to cut the sample specimen. The instrument obtained its operating license in August 2008 to briefly describe the instruments parameters and capabilities, and give examples of two typical applications since it went from commissioning into user mode.

Abstract: In response to the development of new materials and the application of materials and components in new technologies the direct measurement, calculation and evaluation of textures and residual stresses has gained worldwide significance in recent years. Non-destructive analysis for phase specific residual stresses and textures is only possible by means of diffraction methods. The determination of global texture and the local variation of texture for example by inhomogeneous deformation are very important due to the coherence between the texture and the physical and mechanical properties of materials.