Papers by Author: Vladislav Sadykov

Abstract: Gradient permeable metallic substrate material consisting of two layers of NiAl alloy was developed for the SOFC design. The open-cell foam layer (thickness 1-2 mm, cell density 60 ppi) provides the structure robustness, while a thin (100-200 μm) mesoporous layer facilitates supporting functional layers. Cathode layers (LSM, LSFN and their nanocomposites with GDC or YSZ) and anode layers (NiO/YSZ, NiO/YSZ +Ru/Ln-Sr-Mn-Cr-O nanocomposite catalyst) were deposited by slip casting, electrophoretic deposition or air brushing. Thin (5-10 μm) YSZ layer was deposited by MO CVD. Power density up to 550 mW/cm2 at 700oC was obtained on button-size cells using wet H2-air feeds.

Abstract: Nanocrystalline CeO2-ZrO2 (Ce:Zr 1:1) samples doped with La, Pr or Gd cations (containing up to 30 at.%) were prepared via the Pechini route. Pt (1.4 wt.%) was supported via impregnation with H2PtCl6 solution followed by drying and calcination. The samples’ surface features were studied by SIMS and FTIRS of adsorbed CO. The oxygen mobility was characterized by the dynamic oxygen isotope exchange and H2 TPR. Catalytic activity was studied in the flow installation using diluted feeds (0.7% CH4 +0.5% O2 or 1% C3H6O + 0.5% O2 +0.5% H2O in He). In the selective oxidation of methane (POM), the catalytic activity correlates with Pt dispersion controlled by the oxidized sample’s ability to stabilize Pt2+ cations as precursors of small reactive Pt clusters formed under reaction conditions. This is favoured by a larger doping cation (La) and a developed network of nanodomain boundaries. At comparable Pt dispersion, the highest performance was demonstrated by a La-doped system, which correlates with the highest surface/near-surface oxygen mobility controlled by the strength of Ce-O bonds in the surface layer. In the autothermal reforming of acetone, the activity trends differ from those in POM because of the more prominent role of the oxygen mobility required to prevent surface coking.

Abstract: The real structure of nanocrystalline CeO2-ZrO2 (Ce:Zr=1:1) systems prepared via the polymerized polyester precursor (Pechini) route and doped with La3+ or Gd3+ cations, up to 30 at.%, was studied by X-ray powder diffraction, EXAFS and Raman spectroscopy and the surface features characterized by XPS and SIMS. Undoped CeO2-ZrO2 system revealed nanoscale heterogeneity, perhaps due to the co-existence of Zr- or Ce-enriched domains. With large La3+ dopant the system remains bi-phasic within the studied ranges of composition, incorporation of the smaller Gd3+ cation stabilizes the single-phase solid solution. For both systems, the increase of dopant content was accompanied by a decline of domain size and an increase of the average lattice parameter of fluorite-like phases. Depletion of the surface layer by smaller Zr4+ cations was observed, while the surface content of a doping cation is either, close to that in the bulk (La) or below it (Gd). Such a spatial distribution of components results in some ordering of cations within the lattice. It is reflected in different modes of rearrangement of oxygen coordination polyhedra with the Gd or La content (distances and coordination numbers by EXAFS), and specificity of XRD patterns not conforming to a simple model with statistical distribution of oxygen vacancies.