Papers by Author: Volker Ventzke

Abstract: This paper describes microstructure and microtexture development in dissimilar friction welded -TAB-Ti64 joints. The effect of friction welding parameters on microstructure and local properties are examined and discussed. It was found that the intermetallic -TiAl based alloy Ti-47Al-3.5(Mn+Cr+Nb)-0.8(B+Si) (denoted as -TAB) is more sensitive to the applied friction welding parameters used in this study. Furthermore, the bonding between these two alloys was controlled by a diffusion process during a very short process duration. Grain refinement as well microstructure transformation led to local improvement of the friction-welded joints.

Abstract: Dissimilar welded components joined with any kind of welding technologies gain an increasing interest due to significant improvements in engineering structures by using new materials (alloys) or new materials combinations. The present paper deals with laser welding of Al5083-H111 and Al6013-T6 and the characterization of the crystallographic texture. Fine grained Al5083 was joined with coarser grained Al6013.Whereas, Al6013 is strongly oriented dominated by a strong cube component and a much lower Goss component, the finer grained Al5083 shows a week deformation texture. The welding seam itself has a moderate cube texture with a minor <100> fiber texture in welding direction. A small texture variation about the texture strength and the volume fraction of the fiber component was observed along the weld. Results were obtained by neutron, hard X-ray and electron diffraction.