Papers by Author: Wan Soo Kim

Abstract: An automotive transmission rubber mount is a device used in automotive systems to cushion the loads transmitted from the vehicle body structure. TM (transmission) rubber mount has been used to support engine in the vertical direction. In this study, the rubber specimens of the transmission mount are tested to obtain the hyperelastic and viscoelastic properties by the static and dynamic test, respectively. Uni-axial tension test, biaxial tension test, and pure shear test are carried out and Mooney-Rivlin constants are obtained from those static tests. Also, the viscoelastic properties such as storage and loss modulus are obtained from dynamic test. Using the static and dynamic test data, the dynamic stiffness of TM rubber mount subjected to static and dynamic load are predicted with finite element analysis. Solutions allow for comparison between FEA and experimental results. It is shown that the predictions of FEA are close to the experimental results.

Abstract: Fatigue lifetime prediction methodology of the vulcanized natural rubber was proposed by incorporating the finite element analysis and fatigue damage parameter determined from fatigue test. Finite element analysis of 3D dumbbell specimen of natural rubber was performed based on a hyper-elastic material model determined from the tension, compression and shear tests. Stroke controlled fatigue tests were conducted using fatigue specimens at different levels of mean strain. The Green-Lagrange strain at the critical location determined from the FEM was used for evaluating the fatigue damaged parameter of the natural rubber. It was shown that the maximum Green-Lagrange strain was proper damage parameter, taking the mean strain effects into account. Fatigue lives of the natural rubber are predicted by using the fatigue damage parameters at the critical location. Predicted fatigue lives of the natural rubber agreed fairly well the experimental fatigue lives a factor of two.