Papers by Author: Wen Bo Luo

Abstract: The influence of physical aging on mechanical properties of glassy polymers was investigated in this paper. After annealing above T_g to release the previous thermal and stress history, the polymethyl methacrylate (PMMA) samples were quenched to 27°C, aged for various times (t_a), and were then stretched at the same temperature by two ways: (1) step stresses with four different magnitudes varying from 15MPa to 30MPa; (2) constant rate stretch up to fracture. The physical aging effect was monitored by measuring the initial instantaneous elastic modulus (E) and the fracture strength (σ_f) from the stress-strain curves as a function of t_a up to 1368h. It is shown that both E and σ_f of the material increase with aging time and approach to their asymptotic values, which satisfy the KWW rule, while the isochronous creep compliance decreases with log t_a in a linear manner within the aging time range considered in this paper.

Abstract: The tensile stress-strain relationship of rubbers is fairly linear and can be used for obtaining tensile modulus E. In this work we analyzed the tensile stress-strain relationship of filled rubber experimentally and employed the extended 2D homogenization method to compute the modulus of the carbon black (CB) filled rubbers with various CB volume fractions ranging from 5% to 25%. The results reveal that the modulus of CB-filled rubbers increased with the increase in CB volume fraction and in CB aggregation.