Papers by Author: Xin Lan

Abstract: A new system of thermoset styrene-based shape-memory polymer (SMP) filled with carbon black (CB) is investigated. To realize the electroactive stimuli of SMP, the electrical conductivity of SMP filled with various amounts of CB is characterized. The percolation threshold of electrically conductive SMP filled with CB is about 3% (volume fraction of CB), which is much lower than many other electrically conductive polymers. When applying a voltage of 30V, the shape recovery process of SMP/CB(10 vol%) can be realized in about 100s. In addition, the thermomechanical properties are also characterized by differential scanning calorimetery (DSC).

Abstract: This paper is concerned about a design of a new deployable antenna actuated by 6 shape memory alloy (SMA) hinges. The antenna consists of 6 radial, tensioned, parabolic, deployable ribs connecting to a central hub. The hinge, located at each rib, is used of the Nitinol SMA material due to the ability to generate large strains and electrical resistive actuation. The elongated SMA wire is heated by an electrical current, caused to contract in response to a converse thermally-induced phase transformation. The resulting tension creates a moment, imparting rotary motion between two adjacent beams. The concept and operation of deployable antenna system are discussed in detail, and a dynamic simulation is presented. A series of experiments are performed on the SMA actuator to investigate the system behavior in the process of deployment. Results indicated that the hinge with low speed rotation and easy fabrication achieves reliable actuation for the deployment of the antenna, and the antenna demonstrates a high deployment-to-stowage volume ratio.