Papers by Author: Y. Chen

Abstract: The working principle of the electromagnetic barrel finishing machine as well as the generating mechanism and effect of the alternating rotating magnetic field are analyzed, based on the electromagnetic theory to establish a mathematical model of the rotating magnetic field, by the ANSYS finite-element method, resolved the effect of the magnetic flux density and magnetic field strength impacted on the grinding pressure, the electromagnetic finishing machine internal magnetic flux lines distribution law is analyzed under the influence of the alternating rotating magnetic field, finally the reasonableness of the magnetic field distribution is verified by experiments and the electromagnetic finishing machine has been optimized.

Abstract: It is very difficult matter that polishes the internal surface of the pipe, especially to the thin pipe with the traditional surface technology. Because a usual tool cannot into the inner surface of the thin pipe and automation do not achieved easily. This paper brings up a new method that utilize the characteristic of the magnetic force line may penetrate the non-magnetic material, may using the magnetic abrasive finishing (MAF) method complete to the inner surface of the thin pipe precise polishing. The magnetic abrasive finishing does not need special equipment to complete the complex shape internal surface polishing. Moreover, we already obtained the famous processing effect through the experiment. Meanwhile this paper analyses some factors of influences efficiency, and propose some solution method.

Abstract: Polishing the inner surface of slender pipe is very difficult. Because a usual tool cannot into the inner surface of the slender pipe, and automation do not achieved easily; the eye is unable to see, even if handmade is also very difficult. Utilize the characteristic of the magnetic force line may penetrate the non-magnetic material, may using the magnetic abrasive finishing (MAF) method complete to the inner surface of the slender pipe precise polishing is a preferable method and already obtained the good processing effect through the experiment. Therefore, this paper analysis and explanation the finishing principle and experiment device as well as collocation position of magnetic poles etc best experimental condition.

Abstract: Utilize the characteristic that magnetic force line may penetrate the non-magnetic material, using the magnetic abrasive finishing (MAF) method complete to the non-magnetic small workpiece surface precise processing. In order to enhance polishing efficiency, usually with the magnetic particles and abrasive particles mixes together in the sinter method or the cementation method, the cost is higher; the variety is not also complete. Therefore, use the simply mixed method mixed the ferromagnetism iron particles, the alumina particles and the lipin, directly participates in magnetism polishing, already obtained the good processing effect through the experiment. This paper analysis and explanation the best experimental condition such as the granularity proportion of the ferromagnetism iron particles and the alumina particles etc.