Papers by Author: Y.H. Choi

Abstract: Feed drive system of machine tools may experience serious vibrations or unstable motions during high-speed operation. In this paper, a 6 D.O.F (Degree-Of-Freedom) lumped parameter model was proposed in order to analyze vibrations of a ball screw feed-drive system, which takes planar motion. The equations of motion were derived for the proposed model. Natural frequencies of the system and transient responses due to driving motor speed control input were also analyzed. Experimental modal analysis and operational vibration measurements of a laboratory ball screw feed drive system were made. Both theoretical analysis and experimental measurement results showed good agreement with each other. Consequently we concluded that the proposed 6 D.O.F model could be well applicable to the vibration analysis of a ball screw feed-drive system.

Abstract: In a primary reactor cooling system(RCS), a dissimilar weld zone exists between austenitic-ferritic duplex cast stainless steel(CF8M) in a pipe and low-alloy steel(SA508 cl.3) in a nozzle. Thermal aging is observed in CF8M as the RCS is exposed for a long period of time to a reactor operating temperature between 290 and 330°C, while no effect is observed in SA508 cl.3. An investigation of the effect of thermal aging on the various mechanical properties of the dissimilar weld zone is required. The purpose of the present investigation is to find the effect of thermal aging on the dissimilar weld zone. The specimens are prepared by an artificially accelerated aging technique maintained for 100, 300, 900, 1800 and 3600 hrs at 430°C, respectively. The various mechanical tests for the dissimilar weld zone are performed for virgin and aged specimens.