Papers by Author: Y. Tanaka

Abstract: Electro-discharge grinding (hereafter called ED-grinding) was carried out with a trial manufactured metal bond diamond wheel containing electrically conductive diamond grits (hereafter called EC-D-grits-wheel). In this research two effects i.e. removal action of workpiece by electrical discharge machining, and an in-process dressing action of the cutting edges on the grits are expected to take place. The results of ED-grinding with EC-D-grits-wheel (f100mm, SDE120Q80M) on tungsten carbide indicated a significant decrease of 21% in the grinding force, when the set discharge current was increased from 0A to 12A. It was also clarified from the alternative-grinding test with and without an electro-discharge action that stable grinding characteristics along with a reduced grinding force could be achieved in the case of the EC-D-grits-wheel with the electro-discharge action. High-speed camera photographs indicated that a stable discharge condition was achieved.

Abstract: Electrically conductive cutting edges diamond grinding wheels (EC-cutting edges D wheels) have properties such as, 1) convenient precise forming by EDM, 2) realization of high cutting edge density, 3) sufficiently large chip pockets along with fine cutting edges on large diamond grits, 4) contact sensing of the cutting edges with workpiece due to electrical conductivity, 5) expected application to the grinding of various types of steels due to high thermal resistance. Until now, the grinding ability of the sharp edges generated on the electrically conductive CVD diamond thick film wheel by electrodischarge trueing (ED trueing) was confirmed by grinding experiments using a small diameter lapping wheel and a small diameter disk wheel. In this research work, metal bonded diamond wheels containing boron doped electrically conductive diamond (EC diamond) grits, which possess high oxidation temperature, were trial manufactured. From the results of grinding test for an optical glass (BK7), it was found that the wear and grinding force for the EC diamond grits wheel were significantly low compared to a conventional diamond grits wheel. Furthermore, from the results of the investigation on ED trueing performance, a high trueing efficiency along with the possibility of cutting edge tip formation was confirmed.