Papers by Author: Yan Bing Du

Abstract: Surface roughness plays an important role in determining the tribological behaviour of mechanical components (e.g. gears and roller bearings etc.) under full-film and mixed (or partial) elastohydrodynamic lubrication conditions. This paper describes a detailed mechanics analysis of the surface roughness transformation of thin strip which has been cold rolled on an experimental mill. Low carbon steel strips were rolled at various speeds and reductions, and the effects of rolling parameters on surface roughness are studied. The results of surface roughness can provide important information to optimise the rolling schedule and to improve the rolled strip quality.

Abstract: With the technology advancement, crystal plasticity finite element modeling becomes more and more popular in the simulation of metal forming process. In order to obtain a better understanding of the difference between the Taylor model and finite element model during the simulation of metal forming process, an implicit time-integration procedure with the two polycrystal models is applied in the commercial finite element code ABAQUS to simulate the plane strain compression separately. FCC metal is used in this study. The simulation shows that the two polycrystal models both can predict the compression process approximately. The two modelling results of surface roughness show an agreement with that of the experimental results. However, the side profile calculated by the Taylor polycrystal model is much steeper and straighter than that of finite element polycrystal model. The experimental surface roughness curve shows a high frequency fluctuation. It is much steeper than those of the two models. The simulation results also show that the von Mises stress from the Taylor model is much higher than that of the finite element model.