Papers by Author: Yang Guang

Abstract: Frame of solar sweeper is complexly welded structure with thin steel plate. The finite element method is applied of the frame strength analysis in two working conditions, full-load static and braking state. HyperMesh software is used for analysis of integral and welded frame model. CWELD is created to simulate the welding connection. The numerical results show that maximum stress of integral frame is 60.24MPa, and maximum stress of welded frame is 70.7MPa under full-load static state. The maximum stress different is 14.8% of two working conditions. The frame of solar sweeper satisfy strength requirement under the two working conditions, when the welding connection is considered. And the frame can be optimized by using these results.

Abstract: Frame of solar sweeper is complexly welded structure with thin steel plate. A three dimensional model of solar sweeper frame was bullied up in CATIA and finite element mesh was finished in Hypermesh. ANSYS program was applied to modal analysis. Connections and constraints of finite element model(FEM) would be modified through a comparison with modal testing results. It shows that analysis results of distributing tendency and concrete value ranges are coincident well with test results, the max and min error is 1.54% and 8.15% separately. From the results, it could be concluded that accurate dynamic response can be gained based on modified FEM.

Abstract: The dispersed particles of magnetic fluid form stable chain-like clusters under the magnetic field, and shows “the flowing is controllable and the shape is controllable” effect. Based on this characteristic, using migration magnetic acted on the magnetic fluid, the object directional migration can be realize, then the magnetic fluid form ribbon at the same time, has the similar fluctuation behavior. The magnetic fluid aerosol migration principle, the aerosol magnetic circuit design, the magnetic field strength and the magnetic force were separately discussed in this paper. The magnetic fluid hover height using the MSL micrometer dial has determined and aerosol migration feasibility has confirmed using the experiment.