Papers by Author: Young Cheol Lee

Abstract: The rotor is a key determinant of the performance of a compressor and many attempts have been made to improve the efficiency of compressors by optimising rotor design. Rotors are usually made of several layers of steel sheets with thin cavities through the steel sheets, and aluminium alloys are used to fill the cavities by high pressure die casting process, and so bind the steel sheets together. Because of their high fluidity and good damping ability, magnesium alloys can be a good alternative for a high efficiency rotor. In this study, magnesium alloys were used for manufacturing rotors by high pressure die casting process using pin-point gate mold. By adopting a pin-point gate system, additional machining was eliminated and casting defects were reduced due to good castability of magnesium alloys.

Abstract: Magnesium die-casting has experienced dramatic growth over the past decade and the recycling of magnesium scrap has become increasingly important due to the generation of substantial quantities of scrap in the die-casting process. Magnesium is a readily recyclable material and the recycling of magnesium scrap is crucial in making magnesium more competitive. The main concern associated with using the secondary magnesium is the high level of Fe content and oxide inclusions that are detrimental to the corrosion and mechanical properties of the secondary alloy. In this study, the die-cast specimens were produced using the recycled class 1 scrap which is refined by means of Ar bubbling and Mn addition without using refining fluxes, and their mechanical properties and corrosion characteristics were investigated. The results showed that the tensile properties of the secondary AZ91 alloy were equivalent to those of the primary magnesium alloy after appropriate treatments. The corrosion resistance of the recycled magnesium was also found to increase by Ar bubbling and Mn addition.