Papers by Author: Z.C. Xu

Abstract: Laser peen forming is an emerging novel process of metal plate bending, which uses laser-induced shock wave pressure to generate an unbalanced residual stress field in the target, the moment of the residual stress causes metal plate to develop plastic bending deformation. The mechanism of laser shock induced residual stress was introduced firstly, then the deforming process of metal plate induced by residual stresses was discussed and the depth of the residual compressive stress was proposed. Effects of processing parameters on the residual stress distribution and plate bending deformation were numerical analyzed. The results indicated that the bending deformation of sheet was relative to laser peening numbers, peening coverage and thickness of plate, the magnitude and distribution of residual stresses could be precisely controlled by adjusting laser processing parameters.

Abstract: In order to enhance mechanical property and restrain crack growth of 6061-T6 aluminum alloy, laser shot peening (LSP) was employed to induce compressive residual stress and plastic deformation on the surface of metal. The FEA code ABAQUS and MSC. Fatigue were used to simulate crack growth of Compact tension (CT) specimens treated by LSP. The numerical simulation results showed that LSP can effectively inhibit the crack growth, decrease the crack growth rate as well as increase the final crack size, and as a consequence, fatigue life was extended. Adding peening times could get deeper compressive residual stress field which strengthen material surface and restrain crack growth, but the fatigue stress intensity factor threshold decreases.