Papers by Author: Zainal Arifin Ahmad

Abstract: The TiO₂ anodized in organic electrolyte using 85% glycerol is used to investigate the crystalization of TiO₂ nanotubes annealed in air. The anatase start to form at 300°C and rutile appear when the temperature about 600 °C. The phase transformation is dependent on the annealing time and temperature. The anatase can be form at low temperatures when the annealing time is prolonged. The morphology of the annealed TiO₂ nanotubes changes as the function of the annealing temperature and the mechanism for the phase transformation of anatase to rutile is discussed.

Abstract: The toxicity in the Sn-Pb solder has promoted the development of Pb-free solder in the electronics industries. Among the Pb-solders, the Sn-3.5Ag-1.0Cu solder is considered a potential replacement and being studied by many researchers. In the present study, the characteristics of Sn-3.5Ag-1.0Cu lead-free solder were studied. The raw materials were tin, silver and copper powders in micron size. The solder was prepared using powder metallurgy route which includes blending, compacting and sintering. Four blending times and two compacting pressures were used to investigate for optimum condition. The melting temperature of the samples were studied using differential scanning calorimeter (DSC) and the presence of Sn Ag, Cu were confirmed using x-ray diffraction analysis (XRD). Finally the effect of variables on the hardness of the solders is reported.