Papers by Author: Zhi Chao Li

Abstract: It uses MSP430F2274, the ultra low power microcontroller, as the control core of short circuit detection device, through the accurate measurement of low voltage circuit breaker load side of the main wiring of insulation resistance value and the interphase insulation resistance value, outputting high voltage startup sound and light alarm device, and then accomplish the open circuit fault detection. Testing power supply is the use of magnetic coupling resonance principle, from the main power grid electrical insulation for short circuit detection device. The device has the advantages of low cost, small volume, good safety, good detection effect, and can be embedded in use in low voltage circuit breaker.

Abstract: Rotary ultrasonic machining (RUM) is considered as an effective machining method, which has been utilized to machine hard and brittle materials such as advanced ceramics. In order to improve the hole wall surface quality during RUM, it is important to wash away swarf in the gap between the tool and the workpiece as fast as possible. In this paper, a new machine process – intermittent rotary ultrasonic machining (IRUM) – is introduced for the first time. The cutting force, surface roughness and coolant flow rate in conventional rotary ultrasonic machining (CRUM) process and IRUM process are compared. It is found that compared with CRUM, the output coolant flow rate could be increased significantly by using the IRUM method. It is also found that the surface roughness of workpiece can be improved significantly in IRUM.