Papers by Author: Zhi Jie Geng

Abstract: Due to point contact cause, the point grinding process have the lower grinding power and heat to measure and the better cooling conditions. For green manufacturing, the point grinding process has the significance to reduce the consumption of grinding fluid and improve the ground surface integrity and the process greenness. This study analyzes the geometric configuration of the contact area between the wheel and the workpiece in point grinding process, establishes the geometric and mathematic models of the contact area, and investigates the relations between the grinding parameters. The dry point grinding experiments are performed on the ground surface integrity. These investigations show that the dry grinding can be achieved in point grinding process under less depth of cut and the higher grinding speed for the high machining greenness demand.

Abstract: Point grinding is a new type of high and super-high speed grinding process with a point contact zone and less grinding force. Because of the lower grinding power, the grinding heat in point grinding process is much less than that of the conventional grinding process. Therefore, the less grinding coolant jet parameters can be used during point grinding process. That is very propitious to the environment and resource, as well as the green manufacturing. Based on the mathematic model of the edge contact area of point grinding, the simulations of the edge contact area with point grinding angles and depth of cut was performed to study the grinding power. In addition, the relations between the grinding power and the depth of cut and vertical grinding angle were investigated. The dynamic pressure and velocity distributions in the airflow layer around the wheel edge were analyzed more by means of experiment. The point grinding experiment for grinding coolant jet parameters was performed.

Abstract: During cylindrical grinding process, the geometric configuration and size of the edge contact area between the grinding wheel and workpiece have the heavy effects on the workpiece surface integrity. In consideration of the differences between the point grinding and the conventional high speed cylindrical grinding, the geometric and mathematic models of the edge contact area in point grinding were established. Based on the models, the numerical simulation for the edge contact area was performed. By means of the point grinding experiment, the effect mechanism of the edge contact area on the ground surface integrity was investigated. These will offer the applied theoretic foundations for optimizing the point grinding angles, depth of cut, wheel and workpiece speed, geometrical configuration and size of CBN wheel and some other grinding parameters in point grinding process.