Papers by Author: Zhou Sui

Abstract: The continuous flexible roll forming process is a novel sheet metal forming technique for effectively manufacture of three-dimensional surface parts. In this study, two types of finite element (FE) models were developed under the ABAQUS/Explicit environment. The difference of the two models is that the rolls are defined as discrete rigid bodies in model No.1 and are deformable in model No.2. An experiment was carried out using the continuous sheet metal forming setup. The comparison of the numerical computation results with the experimental results shows that the model No.2 can be used for the shape prediction of continuous flexible roll forming process well.

Abstract: Multi-point holder forming (MPHF) adopts series of coupled holder punches, arranged between forming punches, to clamp the whole sheet in the forming zone. The multi-point holder forming processes of spherical parts of titanium mesh plate were simulated by finite element code, and the results were compared with those of multi-point die forming (MPDF). The influence of holder punch load on the deformation of spherical part in multi-point holder forming was investigated. The shape error analysis of titanium mesh formed by MPHF was performed in finial. The results showed that the spherical part had more excellent performance in multi-point holder forming, and the more deformation the titanium mesh was, the larger force of holder punch would be needed. In addition, there was a small shape error for titanium mesh part formed by MPHF before springback.