Papers by Author: Zsolt Kovács

Abstract: Supersaturated Al-4.8Zn-1.2Mg-0.14Zr and Al-5.7Zn-1.9Mg-0.35Cu (wt.%) alloys were processed by Equal-Channel Angular Pressing (ECAP) at 200°C. The crystallite size distribution and the characteristic parameters of the dislocation structure of both Al matrix and precipitates were determined by X-ray diffraction line profile analysis, which has been complemented by transmission electron microscopy (TEM) observations. The results show that severe plastic deformation promotes the precipitation process and consequently has a strong influence on the strength of these alloys.

Abstract: Discs of Al85Ce8Ni5Co2 amorphous alloy were severely deformed by high pressure torsion. Severe plastic deformation exceeding equivalent strain of 8.2 induces the formation of nanocrystalline fcc-Al in a more stable residual amorphous matrix. Calorimetric and X-ray diffraction measurements revealed that the deformed outer part of the disc crystallizes into a mixture of equilibrium phases during the first thermal event. However, in the amorphous ribbon the same crystalline mixture develops only after the second stage.