Papers by Keyword: 3C Polytype

Abstract: We report on the modeling of the temperature field and supersaturation in front of the SiC crystal growth interface of a physical vapor transport growth configuration. The data are compared with experimental results, like the growth of free standing 3C-SiC wafers with a diameter of 50 mm and a thickness of 870 µm. Special emphases is put on the precise handling of the materials properties which include the temperature dependency of the heat and electrical conductivity of the graphite parts at temperatures above 2000 °C.

Abstract: Synchrotron X-ray Beam Topography (SWBXT) and KOH etching observations are presented of interfacial dislocations (IDs) and half-loop arrays (HLAs) which can form under certain growth conditions during homoepitaxy of 4H-SiC on off-cut substrates. The HLAs and IDs are observed to form from pairs of opposite sign basal plane dislocations in the substrate which intersect the substrate surface in screw orientation. These dislocations glide in opposite direction in the epilayer once critical thickness has been exceeded. Half-loop arrays are formed at the same time as the screw-type basal plane dislocations (BPDs) side-glide inside the epilayer. From knowledge of the formation mechanism of the HLAs [, if the line of the HLA is extended to intersect the original threading dislocation line direction, then the distance between this intersection point and the ID along the line direction of the original BPD provides a measure of the critical thickness. It is also calculated that the critical thickness in this case is largely determined by the mutual attractive force between the pairs of opposite sign threading BPDs in the substrate. In addition we observed both interfacial dislocations and HLAs generated from: (a) surface sources of BPDs; (b) micropipes; (c) 3C inclusions; and (d) substrate/epilayer interface scratches.