Papers by Keyword: Acoustical Board

Abstract: Porous plate with bimodal size distribution was prepared using the molten slag from the incinerator. The slag was pulverized to 1-10μm using a planetary ball mill. On heating the pellet formed with this powder, its relative density at 750°C and 800°C were 70% and 85%, respectively. At 750°C, each particle partially attached together at the contacted point. At 800°C, however, all particles melted, coagulated together and increased their size. The slag powder was granulated using a tumbling granulator, resulting granules of 0.5-5mm size. The compressive strength of the granule sintered at 750°C was 0.39 kgf. The density of the granule decreased by ~60%. The sintered granules were mixed with a proper amount of glass powder and starch water, and the slurry was cast to a mold (φ80mmx10mm). After drying the cast plate, it was heated at 630°C. The density of the plate was 1.2 gcm-3, ~43% of original slag value. The sound absorption coefficients of the plate were 0.02 and 0.4 at 200Hz and 1500Hz, respectively.