Papers by Keyword: Adhesive Bonded Joints

Abstract: A research case focused on vented wooden façade system with bonded joints is presented in this paper. The potential of bonded joints is studied and described in more detail and verified through experimental measurements. For the purpose of tests spruce timber profiles were chosen for the load bearing substructure and Siberian larch façade sheeting for the cladding. Three types of industrial adhesives intended for structural bonding were selected. The article is focused on the preparation as well as on the subsequent experimental verification of substructure bonding retention to the cladding. The adhesive bonds were tested both in tension as well as in shear at a temperature of (293.15 ± 3) K and a relative humidity of (55 ± 10) %. The test results proved the fact that bonded joints are more than suitable equivalent to the mechanical joints. During the tests appeared some differences in stability and failure behaviour between the adhesive systems as well as within the sheeting material. Additionally, the suitability of selected group of adhesives in combination with Siberian larch cladding material as well as with the timber substructure was confirmed.

Abstract: Adhesive bonding is a particularly effective method of assembling complex structures, especially those made from dissimilar materials. If the joint is well designed and correctly executed, the adhesive bond ought to be one of the strongest components of the structure and most certainly should not be the reason for reducing the load capacity or fatigue life. The major factors determining the integrity of an adhesive bond are selection of the most appropriate adhesive, joint design, preparation of the bonding surfaces, strict quality control in production and monitoring in service. This work focuses on the evaluation of the load capacity of some configurations of adhesively bonded single-strapped joints based on finite element analyses. The adhesive layer thickness, the overlap length, the adherent and strap thicknesses were varied as well as the materials properties.