Papers by Keyword: Al-Ti Alloys

Abstract: In this paper, surface morphology and phase constitution of ceramic membrane fabricated via Micro-arc oxidation on Al -Ti alloys was studied .The via Micro-arc oxidation was reacted in phosphate and silicate mixed electrolyte.And by contrasting of phase constitution of the ceramic membrane, the relationships of thickness of the ceramic membrane and time,and the relationships of arcing voltage and time to inquire the features of Micro-arc oxidation on Al -Ti alloys.

Abstract: We investigated the contribution to the high yield strength due to the solid solution strengthening in nanocrystalline Al-Ti alloys produced by a vapor quench method. The misfit strain due to solute Ti atom in aluminum was obtained from the first principles calculation. Then, the theoretical result of the contribution to the yield strength due to the solid solution strengthening was estimated from the misfit strain using the Friedel’s theory. In dilute Al-Ti alloy, the theoretical results of the solid solution strengthening from the misfit strain was in good agreement with the analytical result using the measured grain size and yield stress.

Abstract: Microstructure and texture evolution during equal channel angular pressing (ECAP) of Al-5 mass%Ti alloy are investigated for up to 8 passes via routes A and BC. Platelet-shaped Al3Ti particles in the Al-5mass%Ti alloy are cracked severely with repetitive ECAP passes, and the mean size of the Al3Ti particles is decreased with increasing the number of ECAP passes. Microstructural observation showed that an Al–Ti supersaturated solid solution is formed during the ECAP process. It is also found that the Al-Ti alloy after ECAP by route A and route Bc methods have very different microstructures. Namely, after ECAP by route Bc, the fine Al3Ti particles are homogeneously dispersed in Al matrix, while the microstructure has highly anisotropic distribution after ECAP by route A.