Papers by Keyword: Al1070

Abstract: Batch SPD processes have a limited scope for being used on an industrial scale. More feasible are continuous processes among which the new SPD process of Incremental ECAP (IECAP) is an attractive option. In this paper, a double-billet version of I-ECAP, which doubles process productivity, is presented. The concept of the process is first checked using the finite element (FE) method. FE simulation results are the basis for the design of an experimental rig. Trials of nanostructuring of 10x10x200 Al 1070 billets are carried out with the forces on the reciprocating die and the feeder measured. Metallurgical samples after 4 and 8 passes of I-ECAP (route BC) are investigated using TEM. Tensile properties after 8 passes are established. All these results show that the new SPD process of I-ECAP gives the results comparable to those obtained by a classical batch ECAP with the added capability of dealing with much longer (possibly infinite) billets.

Abstract: Batch severe plastic deformation (SPD) processes are mainly used for laboratory purposes. More industrially oriented are continuous processes among which the new SPD process of Incremental Equal Channel Angular Pressing (I-ECAP) is an attractive option. This paper investigates the feasibility of using I-ECAP for nanostructuring of plates rather than bars. First, a 3D finite element simulation has been performed which shows the importance of restricting material flow in the direction of plate width. A laboratory rig has been designed, which converts the vertical movement of the machine crosshead into an oblique movement of the reciprocating punch. Preliminary trials of I-ECAP have been carried out on a 4x30x100mm Al 1070 plate. Metallurgical samples after 4 and 8 passes of I-ECAP (route A) have been investigated using TEM. In conclusion, the new SPD process of I-ECAP is capable of processing plates, which opens up new possibilities of nanostructuring metals on an industrial scale.