Papers by Keyword: Al/Cu Composite

Abstract: In this study, Al/Cu composite was produced by hydrostatic extrusion process at 523 K. Mechanical and electrical properties of Al/Cu composite were investigated during isothermal aging. Microstructure observation and composition analysis of the interface was carried out scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS), respectively. Three kinds of intermetallic composites are observed and they have increased in size as a function of annealing process. Their growth brings about the decrease in the hardness Al/Cu composite.

Abstract: Friction stir processing (FSP) was used to fabricate Al/Cu metal matrix composite (MMC). The effects of two different tool pin profiles (straight cylindrical and square) and the number of FSP passes on microstructure, tensile properties and microhardness were studied. The results indicated that good dispersion of micro-sized Cu particles, finer grains, higher tensile properties and higher microhardness, can be achieved by the square tool pin profile compared to the samples produced by the other tool. Also it was observed that the ultimate tensile strength of the samples produced by two FSP passes, as a result of Cu particles shattering, increased intensively compared to the samples fabricated with first FSP pass. Further FSP passes increased the elongation of the composites without any considerable changes in yield and ultimate tensile strength.