Papers by Keyword: BF

Abstract: Loess based copolymer (L/CoPolym), a typical silicate minerals / copolymer composite, was used as polymer adsorbent for removing basic fuchsin (BF) in wastewater. Under the optimal condition of adsorption, the removal rate of BF reached to 98.2%, and the adsorption capacity got to 565.0 mg/g. Adsorption dynamics were consistent with pseudo-second-order kinetic model and isotherm model can meet the Freundlich isotherm.

Abstract: Fe, V and Ti of vanadic titanomagnetite in Panxi region in China have been extracted in traditional BF process so far, but the comprehensive utilization level of the ore is lower. To solve the problem, the research on direct reduction of the ore have been carried out continuely. Because of the restriction of equipment, technology and other factors, there is not a new technology can achieve mass industrial production. It is found by analysis that the BF process hold a leading position and direct reduction process can only be a supplement of utilization of vanadic titanomagnetite at presnt and days to come.

Abstract: By study the development situation of blast furnace smelting in china and the blast furnace operation system and technology, combined with production conditions of JISC BF, based on a large number of the production data, the comparison analysis test on JISC BF operation system and technology was did. Through continuously optimization and practice, the relatively suitable operation system and technology of JISC BF at present was explored, which could reduce the coke ratio into furnace while increasing the coal injection ratio and making great economic effect.

Abstract: With practical data of the BF ironmaking from Jiuquan Iron&Steel Cooperation Ltd. (JISC), taking the quality of pig iron as evaluation indicator, mathematical models based on the least square regression and partial least square regression were set up respectively by co-relation analysis of feeding-to-product interval of the BF processing. The calculation results showed that the reasonable description can be obtained by the partial least square regression model; and 10 of 29 parameters with obvious impact on the BF operation were listed accordingly. Meanwhile, an optimal group of parameters was found by genetic algorism calculation method. The optimal index of the group was 99.13％. This study is beneficial to the improvement of feeding adjustment and optimal operation of BF ironmaking.