Papers by Keyword: Bagasse Cellulose

Abstract: The dissolution rate of bagasse cellulose in LiCl/DMAc solution actived by thermal DMAc and KMnO4 were compared. The effects of several factors on the dissolution rate were discussed, including cellulose concentration, LiCl concentration, solution temperature, and disssolving time. The results showed that the dissolution rate of bagasse cellulose actived by KMnO4 is higher than that actived by thermal DMAc. The dissolution rate increased with the increasing of LiCl concentration, solution temperature, and dissolving time, respectively.

Abstract: Cellulose nanocomposite is one of the most fascinating materials with broad applications. In this work, cellulose-magnetite nanocomposite has been prepared by dispersion of magnetite nanoparticles in a homogenous ionic liquid solution of grafted cellulose. Bagasse cellulose was first grafted with polymethacrylic acid in 1-butyl-3-methylimidazolium, and then fabricated with Fe3O4 nanoparticles during the homogeneous media. The obtained nanocomposite contained high content of iron due to the clelation of the grafted cellulose and Fe3O4 nanoparticles. It also exhibited superparamagnetic behavior with 8.606 emu/g saturation magnetizations. The cellulose-magnetite nanocomposite will be potential for the development of functional cellulose and protective materials for electromagnet radiation or microwaves.

Abstract: In this paper, bagasse cellulose was dissolved in ionic liquid (1-butyl-3-methylimidazolium chloride) by microwave heating. The orthogonal test and variance analysis were applied to obtain the optimum dissolution condition of bagasse in ionic liquid. The effects of microwave power, temperature and the mass fraction of cellulose were examined by an orthogonal experiment designed through the different dissolution time and the yield of regeneration bagasse. Results showed that the optimal dissolution condition for faster dissolution time was 1% of bagasse cellulose in ionic liquid at 140°C, 500W; while, to get the most yield of cellulose, the condition was 2% of bagasse cellulose at 130°C, 500W.

Abstract: Graft copolymerization of diethylenetriamine onto bagasse celluloses was investigated with ammonium ceric nitrate as initiator in an aqueous medium. The condition of the graft copolymerization initiator concentration, the mass ratio of monomer/cellulose, reaction temperature, reaction time based on the experiment is optimized according to the zeta potential. The results showed the relative optimum process conditions were: the concentration of initiator at 36.98mmol/L, the mass ratio of the monomer and cellulose at 1:1, the reaction temperature at 70°C, and the reaction time by 3h. In addition, the graft copolymers were characterized by Fourier transform infrared spectra (FT-IR), X-ray diffraction analysis (XRD). The results showed that bagasse celluloses could be grafted with diethylenetriamine in aqueous medium.

Abstract: A new cellulose graft copolymer was synthesized by the homogeneous graft polymerization in ionic liquid. The methyl methacrylate was successfully grafted onto the bagasse cellulose in 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) as a homogenous media. The obtained copolymer was characterized by Fourier transform infrared spectroscopy (FT-IR) and Scanning electron microscope (SEM). The results of thermal analysis curves exhibited two separated pyrolysis with cellulose and the grafted pMMA. Moreover, the homogenous reaction media applied can be carried out in completely recycled ionic liquid, and the modified cellulose has a potential value for oil absorbent.

Abstract: Bagasse is an abundant agricultural byproduct. The use of bagasse has generated much interest due to its low cost, possibility of environmental protection and use of locally available renewable resources. In this paper, cellulose was dissolved in the ionic liquid （1-butyl-3-methylimidazolium chloride） and regenerated in water. FT-IR and SEM were used to characterize the structure of the original and regenerated cellulose. It was found that the treatment of the original cellulose in the ionic liquid significantly degraded the cellulose and completely destroyed the cellulose crystals. Despite many studies of the chemical modification of cellulose published around the world in this area, only a few have been investigated about the regeneration of sugarcane bagasse. Theoretical basis was established for further research on the application of the regenerated cellulose in material science.