Papers by Keyword: Cavity Nucleation

Abstract: Creep damage is one of the serious problems for the high temperature industries and computational approach (such as continuum damage mechanics) has been developed and used, complementary to the experimental approach, to assist safe operation. However, there are no ready creep damage constitutive equations to be used for predicting the lifetime for this type of alloy, particularly for low stress. This paper presents an analysis of the cavity nucleation, growth and coalescence mechanism of 9Cr-1Mo-VNb steel (P91 type) under high and low stress levels and multi-axial stress state.

Abstract: A theoretical model considering the distribution of the grain sizes and grain-boundary ledges was developed for cavity nucleation in creeping ceramics containing viscous grain boundary phase. The critical stress involving the effects of various shapes of cavities and viscosity coefficient (η) for cavity nucleation was presented. Then, the local stress concentration factor concerning different distributions of grain-boundary ledges was calculated and discussed. The results showed that various shapes of cavities and η are not the main influencing factors on the critical stress. The stress concentration factor increases with the increase of grain-boundary ledge size or the density. Therefore, it would be liable to cause cavity nucleation at gain boundary when the density of grain-boundary ledges is high and the size is large.