Papers by Keyword: Crystal Anisotropy

Abstract: The electrical properties of perovskite-based ferroelectric films were improved by ion modification using rare-earth cations. Thin films of rare-earth-modified lead zirconate titanate [Pb(Zr,Ti)O3] were fabricated on (111)Pt/Ti/SiO2/(100)Si substrates by a chemical solution deposition technique. The substitution of volatile cations in the simple-perovskite oxides, such as Pb2+ in Pb(Zr,Ti)O3 films, enhanced the insulating properties of the film. The crystal anisotropy of the Pb(Zr,Ti)O3 film could be controlled by varying the species and the amount of replacing cations to enhance the spontaneous polarization. Thus, ion modification using Dy3+ cation could enhance the remanent polarization of Pb(Zr,Ti)O3 film consequently.

Abstract: In order to machine high accuracy Potassium Dihydrogen Phosphate (KDP) crystal part, the indentation experiments are carried out with various loads and various orientation angles. The experimental results show that the critical condition of brittle-ductile transition of KDP has strong anisotropy. Therefore, the influence factors on the surface quality of crystal KDP was discussed, it is shown that influences of the tool's geometry parameter, feed rate and Nominal depth of cut etc on the surface quality of KDP are main. Afterwards the cutting experimental study on crystal KDP material is carried out. The experimental results show that the super-smooth surface quality only can be obtained while KDP is ultra-precision machined in ductile mode.