Papers by Keyword: Diffusion Wear

Abstract: Cutting temperature always highly reaches over to 1000¡æ when high speed machining with PCBN tools. Diffusion of tool material element may have important influence on tool wear at such high temperature., the diffusion wear and oxidation wear have become the major wear mechanism. In this paper, the rules of diffusion wear and oxidation wear for PCBN cutting tools are proposed and analyzed based on thermodynamics theory. Dissolution concentrations in typical normal workpice materials of PCBN tool material at different temperature are then calculated. Diffusion reaction rules in high temperature are developed and analyzed using Gibbs free energy criterion. The machining tests were conducted using the PCBN tools at different cutting speeds of 50, 95,100 and 180 m/min, feed of 0.1, 0.2 and depth of cut of 0.1, 0.8, 1, and 1.5 mm respectively on PUMA300LM numerically-controlled lathe. It was found that the theoretical results were uniform with the experimental data; the results will provide useful references for tool material design and selection.

Abstract: Cutting temperature always highly reaches over to 1000°C when high speed machining with PCBN tools. Diffusion of tool material element may have important influence on tool wear at such high temperature., the diffusion wear and oxidation wear have become the major wear mechanism. In this paper, the rules of diffusion wear and oxidation wear for PCBN cutting tools are proposed and analyzed based on thermodynamics theory. Dissolution concentrations in typical normal workpice materials of PCBN tool material at different temperature are then calculated. Diffusion reaction rules in high temperature are developed and analyzed using Gibbs free energy criterion. The machining tests were conducted using the PCBN tools at different cutting speeds of 50, 95,100 and 180 m/min, feed of 0.1, 0.2mm and depth of cut of 0.1, 0.8, 1, and 1.5 mm respectively on PUMA300LM numerically-controlled lathe. It was found that the theoretical results were uniform with the experimental data; the results will provide useful references for tool material design and selection.

Abstract: Ultra-precision diamond cutting of ferrous metals has not been successful in application due to significant tool wear. In this work, numerical simulations and experimental investigations are presented in order to study the interface diffusion between diamond tool and workpiece materials. A diffusion model with respect to carbon atoms from diamond tool penetrating into chips and machined surface was established. The numerical simulation results of the diffusion process reveal that the distribution laws of carbon atoms concentration have a close relationship with diffusion distance, diffusion time and the original carbon concentration of the work material. In addition, diamond face cutting tests of die steels with different carbon content are conducted at different depth of cuts and feed rates to verify the previous simulation results. The wear morphology of rake face and flank face of diamond tool were detected by scanning electron microscopy. Energy dispersive X-ray analysis was proposed to investigate the change in chemical composition of the chips and machined surface. The results of this work benefit for a better understanding on the diffusion wear mechanism in single crystal diamond cutting of ferrous metals.

Abstract: Cutting temperature always highly reaches over to 1000°C when high speed machining with PCBN tools. Diffusion of tool material element may have important influence on tool wear at such high temperature, the diffusion wear and oxidation wear have become the major wear mechanism. In this paper, the rules of diffusion wear and oxidation wear for PCBN cutting tools are proposed and analyzed based on thermodynamics theory. Dissolution concentrations in typical normal workpice materials of PCBN tool material at different temperature are then calculated. Diffusion reaction rules in high temperature are developed and analyzed using Gibbs free energy criterion. The machining tests were conducted using the PCBN tools at different cutting speeds of 50, 95,100 and 180 m/min, feed of 0.1, 0.2 and depth of cut of 0.1, 0.8, 1, and 1.5 mm respectively on PUMA300LM numerically-controlled lathe. It was found that the theoretical results were uniform with the experimental data; the results will provide useful references for tool material design and selection.

Abstract: Cutting temperature always highly reaches over to 1000°C when high speed machining with PCBN tools. Diffusion of tool material element may have important influence on tool wear at such high temperature, the diffusion wear and oxidation wear have become the major wear mechanism. In this paper, the rules of diffusion wear and oxidation wear for PCBN cutting tools are proposed and analyzed based on thermodynamics theory. Dissolution concentrations in typical normal workpice materials of PCBN tool material at different temperature are then calculated. Diffusion reaction rules in high temperature are developed and analyzed using Gibbs free energy criterion. The machining tests were conducted using the PCBN tools at different cutting speeds of 50, 95,100 and 180 m/min, feed of 0.1, 0.2 and depth of cut of 0.1, 0.8, 1, and 1.5 mm respectively on PUMA300LM numerically-controlled lathe. It was found that the theoretical results were uniform with the experimental data; the results will provide useful references for tool material design and selection.

Abstract: Cutting temperature always highly reaches over to 1000°C when high speed machining with PCBN tools. Diffusion of tool material element may have important influence on tool wear at such high temperature, the diffusion wear and oxidation wear have become the major wear mechanism. In this paper, the rules of diffusion wear and oxidation wear for PCBN cutting tools are proposed and analyzed based on thermodynamics theory. Dissolution concentrations in typical normal workpice materials of PCBN tool material at different temperature are then calculated. Diffusion reaction rules in high temperature are developed and analyzed using Gibbs free energy criterion. The machining tests were conducted using the PCBN tools at different cutting speeds of 50, 95,100 and 180 m/min, feed of 0.1, 0.2 and depth of cut of 0.1, 0.8, 1, and 1.5 mm respectively on PUMA300LM numerically-controlled lathe. It was found that the theoretical results were uniform with the experimental data; the results will provide useful references for tool material design and selection.

Abstract: Cutting temperature always highly reaches over to 1000°C when high speed machining with PCBN tools. Diffusion of tool material element may have important influence on tool wear at such high temperature, the diffusion wear and oxidation wear have become the major wear mechanism. In this paper, the rules of diffusion wear and oxidation wear for PCBN cutting tools are proposed and analyzed based on thermodynamics theory. Dissolution concentrations in typical normal workpiece materials of PCBN tool material at different temperature are then calculated. Diffusion reaction rules in high temperature are developed and analyzed using Gibbs free energy criterion. The machining tests were conducted using the PCBN tools at different cutting speeds of 50, 95,100 and 180 m/min, feed of 0.1, 0.2 and depth of cut of 0.1, 0.8, 1, and 1.5 mm respectively on PUMA300LM numerically-controlled lathe. It was found that the theoretical results were uniform with the experimental data; the results will provide useful references for tool material design and selection.

Abstract: Cutting temperature always highly reaches over to 1000°C when high speed machining with PCBN tools. Diffusion of tool material element may have important influence on tool wear at such high temperature, the diffusion wear and oxidation wear have become the major wear mechanism. In this paper, the rules of diffusion wear and oxidation wear for PCBN cutting tools are proposed and analyzed based on thermodynamics theory. Dissolution concentrations in typical normal workpice materials of PCBN tool material at different temperature are then calculated. Diffusion reaction rules in high temperature are developed and analyzed using Gibbs free energy criterion. The machining tests were conducted using the PCBN tools at different cutting speeds of 50, 95,100 and 180 m/min, feed of 0.1, 0.2 and depth of cut of 0.1, 0.8, 1, and 1.5 mm respectively on PUMA300LM numerically-controlled lathe. It was found that the theoretical results were uniform with the experimental data; the results will provide useful references for tool material design and selection.

Abstract: Cutting temperature always highly reaches over to 1000°C when high speed machining with PCBN tools. Diffusion of tool material element may have important influence on tool wear at such high temperature; the diffusion wear and oxidation wear have become the major wear mechanism. In this paper, the rules of diffusion wear and oxidation wear for PCBN cutting tools are proposed and analyzed based on thermodynamics theory. Dissolution concentrations in typical normal workpiece materials of PCBN tool material at different temperature are then calculated. Diffusion reaction rules in high temperature are developed and analyzed using Gibbs free energy criterion. The machining tests were conducted using the PCBN tools at different cutting speeds of 50, 95,100 and 180 m/min, feed of 0.1, 0.2 and depth of cut of 0.1, 0.8, 1, and 1.5 mm respectively on PUMA300LM numerically-controlled lathe. It was found that the theoretical results were uniform with the experimental data; the results will provide useful references for tool material design and selection.

Abstract: Ti6Al4V has great affinity with tool material in machining process, which easily leads to tool diffusion wear. Turning experiments were carried out to study cutting temperature and pressure at tool-chip/workpiece. Based on the analysis, a scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectrometer (EDS) was used to analyze tool wear morphology. The affinity of tool and workpiece material using the Ti-W, Ti-Co diagram was also studied to elaborate the diffusion mechanism in this present study. The results shows that the cutting temperature is very high and the temperature increases with the increase of cutting speeds in machining Ti6Al4V. At the contact area, the highest temperature is located in tool rake face near to tool tip. The resilience of workpiece results in serious attrition between tool flank face and the machined surface. The highest pressure is located in tool flank face near to tool tip and the pressure in tool-workpiece interface is much higher than that in tool-chip interface. Under the high cutting temperature and high pressure at tool-chip/workpiece interface, diffusion occurred both at tool rake an flank face in machining Ti6Al4V. Because of the higher temperature at tool rake face diffusion at tool rake face ia more sever than that at tool flank face.