Papers by Keyword: Double Lap Joint

Abstract: Both normal and joggle double lap joints were numerical analyzed to get the stress distribution in mid-bondline and in adherends near the interface using the finite element method (FEM). The results from the numerical simulation show that nearly all the peak values of the stress components as well as the von Mises equivalent stress distributed in both mid-bondline and adherend near the interface of the adhesively bonded joggle double lap joint are significantly decreased to the normal one. It was pointed out that the load bearing capacity of the joggle double lap joint may be higher than that of the double lap joint for its decrease of peak stress, much evenly stress distribution in the middle part of the overlap zone so that more load can be subjected by the joggle double lap joint.

Abstract: This paper presents an experimental investigation on the behaviour of structural adhesive bonding under quasi-static and moderately high loading rates. It addresses the effects of the loading rate on the strength of the adhesively bonded joints under dynamic tensile. A comparison has been achieved between the strength and the damage of specimens’ made of aluminium and lamina substrates. High rate tests showed ringing in the force/displacement curves.