Papers by Keyword: Eutectic Carbide

Abstract: The present work has investigated the effect of aluminum on the solidification microstructure of M2 high speed steel. The results show that the as-cast structure is refined and the networks of M2C eutectic carbides are distributed more homogeneously with the addition of aluminum. Meanwhile, the morphology of M2C changes from the fibrous shape to the plate-like one. Despite of the same crystal structure, the microstructure differs greatly between the two carbides. Compared with the fibrous M2C, micro-twining is formed in the plate-like M2C, resulting in the orientation changes between different plates. It is expected that the solid/liquid interface structure of M2C may evolve from the non-faceted into the faceted due to the addition of aluminum.

Abstract: The influence of rare earths(RE) and Mg compound modification on eutectic carbide morphology and matrix of high speed steel(HSS) roll was investigated. The results show that the matrix can be refined by the RE-Mg compound modifier, the eutectic carbides are inclined to turn into small lump, whose distribution is homogeneous. After modification, the heat conductivity coefficient of HSS is increased and heat expansion coefficient is decreased. Moreover, RE-Mg modification is able to increase the cycles of thermal fatigue crack initiation and decrease the propagation rate. After cycling 700 times at the condition of heating at 600oC and cooling in 25oC water, the length of thermal fatigue crack is lessened by 41.12%.