Papers by Keyword: Forward Slip

Abstract: Effects of process parameters on friction in cold strip rolling process have been studied in this article. The prime objective is to examine the major parameters affecting the metal working process. A varying coefficient of friction through the roll contact arc has been determined. A few formulae, commonly used to predict the coefficient of friction from forward slip measurements of a rolling process, have been evaluated according to forward slip measurements and coefficient of friction data. Essentially, this article bridges the industrial constant coefficient friction approach from forward slip measurements with the academic varying coefficient of friction strategy. A systems analysis has been made regarding the effects of potentially important parameters on friction in cold rolling. Based on this analysis, the effects of a few parameters have been identified of most importance.

Abstract: In order to predict the forward slip value correctly, this article established regression model of forward slip in oval-round and round-oval pass rolling, predicted the forward slip values in ach pass in Ф12 and Ф16 round bar rolling for a factory, measured forward slip of lead rods in experimental mill using geometrical modeling method. The results showed that the model of forward slip has great practical value for proper design rolling speed, rolling schedule, thereby ensuring the continuous rolling process carried out smoothly

Abstract: Behavior of the transversal crack and the longitudinal crack on slab surface during V-H rolling was simulated by the FEM. The contact pressure on crack surfaces and the crack-tip stress change rules during rolling were analyzed. Results show that the contact pressure on crack surfaces decreases and the tensile stress appears at crack tip in the zone of slippage on the delivery side, which may make the cracks propagation. For the phenomenon, the stress distribution along rolling direction and along width direction in rolling are analyzed, and the influence of forward slip on the closure and growth of the surface transversal crack and the surface longitudinal crack are discussed. Results support some significant information for researching the behavior of the slab surface defects in rolling process.