Papers by Keyword: Full Field Measurement

Abstract: This paper compares the technology and the performances of three ultra high speed cameras for full-field deformation measurements with Digital image correlation or the grid method. The three cameras are based on multiple CCD sensors (Cordin 550-62, with rotating mirror or DRS IMACON 200 with gated intensified CCDs) or dedicated chip (Shimadzu HPV). The advantages and limitations of these cameras are critically reviewed.

Abstract: For the analysis of vibrations and mode shape extraction in particular the use of optical full-field measurement techniques has grown during the last years. Beside techniques like Digital Speckle Pattern Interferometry, Moiré, Thermography or Photoelasticity the Digital Image Correlation techniques have already been successfully proven to be an accurate displacement analysis tool for a wide range of applications.

Abstract: Recent advances in measurement techniques, including digital image correlation, automated photoelasticity, electronic speckle pattern interferometry and thermoelastic stress analysis, permit full-field maps of displacement or strain to be obtained easily. They provide large volumes of mostly redundant data, which should be condensed to the essential information to permit straightforward processes such as validations of computational models or damage assessments. A way to do this is by image processing, an important aspect of which is the definition of an orthogonal basis (orthogonal kernel functions). Generally, this is problem dependent and requires some skill from the analyst if the number of image features (the coefficients of the orthogonal basis) is to be restricted to a suitably small number. Advantage may be taken of patterns of symmetry, for example cyclically symmetric patterns are well-suited to treatment by Zernike polynomials and rectangular patterns are well-suited to treatment by Fourier series. The Zernike and Fourier kernels are continuous polynomials with orthogonality properties that require integration and must be discretised. The discrete Tchebichef polynomials are ideal for the treatment of full-field information at multiple discrete data points. In many cases the data field is localised around a particular feature, such as local strain around a hole in a tension-test specimen. In this case, the polynomial basis should similarly be localised by various forms of scaling – this requires the application of the Gram-Schmidt procedure to maintain orthogonality. The image features (sometimes called shape features) are meaningful and may be used to identify particular patterns in the data – e.g. for detecting cracks or other forms of damage. When assembled in a feature vector, the distance between feature vectors from measured and numerical results are useful for refining numerical models. In this paper the principles of image analysis, as applied to full-field displacement/strain data are explained and experimental examples are used to illustrate the practical usefulness of the method. The applications include (i) vibration mode shapes of laminated honeycomb structures and, (ii) strain in an aluminium plate with a central hole in tension.

Abstract: The aim of this work is to identify parameters driving constitutive equations of materials with displacement field measurements carried out by image stereo-correlation during an unidirectional tensile test. We evaluate two identification techniques. The first one is the virtual fields method which consists in writing the principle of virtual work with particular virtual fields. It is generally used in the case of linear elasticity and it requires a perfect knowledge of the model in terms of boundary condition since the virtual fields used must be kinematically admissible. This method allows to determine parameters by a direct and fast calculation, without iterations. The second method is the finite element model updating method. It consists in finding constitutive parameters that achieve the best match between finite element analysis quantities and their experimental counterparts. This method is more adaptable than the virtual field method but it needs to spend more calculation time.

Abstract: Tensile tests were performed in order to identify the stiffness components of superconducting windings in the shape of rings (also called ‘double pancakes’). The stereo image correlation technique was used for full-field displacement measurements. The strain components were then obtained from the measured displacement fields by numerical differentiation. Because differentiation is very sensitive to spatial noise, the displacement maps were fitted by polynomials before differentiation using a linear least-square method. Then, in the orthotropy basis, the four in-plane stiffnesses of the double pancake were determined using the Virtual Fields Method.

Abstract: Optical techniques for displacement measurements have become more common in recent years. The current preferred technique is digital image correlation (DIC) which works very well but has limitations for measuring diametral contractions in cylindrical specimens using a standard 3D system. To overcome the limitations of using either a diametral clip gauge or standard 3D DIC, a method has been developed for measuring diametral contractions simultaneously in two directions using a standard 3D DIC system in conjunction with an edge detection algorithm. Results have shown the method to work well.

Abstract: Strain field measurement with non intrusive techniques is needed in order to characterize the behaviour of steels at high temperatures subjected to small displacements. In this work we present a technique based on laser-produced speckles coupled with a cross-correlation cross-spectrum method. This method proves more accurate than cross-correlation for small displacements. The laser wave length used (532 nm) allows to perform strain measurements, even with heat radiation.

Abstract: As a complement to classic characterization in the identification of elastomers, full-field measurement methods such as image stereo correlation can undeniably contribute to the validation of elastomeric connection behaviour. Indeed, these measurements enable three-dimensional displacement and strains fields over the totality of the studied surface to be finely reached. Characterization tests in shearing on an elastomer were followed by image stereocorrelation up to high strain levels. The experimental results could thus be confronted with theoretical results using an Alexander hyperelastic behaviour law, which enabled the relevance of this law to be validated locally.

Abstract: This paper presents a short overview of the state of the art and future challenges of the use of full-field measurements and inverse procedures to identify the constitutive mechanical parameters of a wide range of materials. It concentrates on the so-called Virtual Fields Method (VFM) which is a tool fully dedicated to the processing of full-field measurements. Some of the future challenges are briefly covered here, namely the design of test configurations and the application to damage assessment, high strain rate testing and biomaterials. Some examples are given and the main scientific issues briefly discussed.

Abstract: This work deals with the development of a full-field extensometric method at a micrometric scale in order to precisely identify the local features of a metallic alloy at the scale of the grains. The full-field method that has been chosen is the grid method that applies a spatial phase-shifting algorithm to a periodic pattern. To mark the sample, direct interferometric photolithography was used. The paper presents the basic features of the technique and first mechanical test results are commented.