Papers by Keyword: Goodman Diagram

Abstract: The truck that is used as running equipment for freight car support is a core structural part that supports the load of the car body and that greatly influences the safety of freights and vehicles, as well as their running performance. The running equipment is composed of truck frames, wheels and wheel axles, independent suspensions, and brakes. Among these components, the truck frame supporting the load of the vehicles and freights may be the most important one. This study was carried out to analyze the structure of truck frames and to determine whether they are safe when the maximum vertical load, breaking load, and front and rear loads are applied to them. This was done by subjecting the truck frames to stress tests and then measuring the stress on each of their parts. Before the load test, a structural-analysis program was used for the stress distribution analysis of the truck frame. To measure the stresses based on the results of the structural analysis, strain gages were attached to the surfaces of truck frames [1].

Abstract: The truck that is used as running equipment for freight car support is a core structural part that supports the load of the car body and that greatly influences the safety of freights and vehicles, as well as their running performance. The running equipment is composed of truck frames, wheels and wheel axles, independent suspensions, and brakes. Among these components, the truck frame supporting the load of the vehicles and freights may be the most important one. This study was carried out to analyze the structure of truck frames and to determine whether they are safe when the maximum vertical load, breaking load, and front and rear loads are applied to them. This was done by subjecting the truck frames to stress tests and then measuring the stress on each of their parts. Before the load test, a structural-analysis program was used for the stress distribution analysis of the truck frame. To measure the stresses based on the results of the structural analysis, strain gages were attached to the surfaces of truck frames. The results of the stress tests showed that truck frames have a safe vehicle load design.

Abstract: The significant gear fatigue bending life variation between the single directional versus bi-directional loading had been observed over the decades, but very limit information has been revealed. To gain the comprehend understanding of this subject for practical usages, the author thus first tried to apply the conventional popular fatigue theories to evaluate the difference, but in vein. This report is to describe the course of assessment and also propose a new method to minimize the discrepancy between the theoretical and test results.