Papers by Keyword: High Pressure Jet

Abstract: Cavitation erosion (CE) behavior of 2205 duplex stainless steel (DSS) under high pressure was investigated by using water jet apparatus, which designed according to ASTM G134-95. The effects of the nozzle diameter and target distance on mass loss were analyzed. The CE behavior of 2205 DSS was evaluated by cumulative mass loss with time, and the incubation period and the CE rate were calculated by fitting results. From the scanning electron microscope (SEM) observation, it is found that the surface of 2205 DSS was damaged slightly during the CE incubation period and eroded dramatically in the accelaration stage. The energy dispersive spectrometer (EDS) results showed that the Ni content in the erosion area appeared obviously lower in comparison with the non-erosion area. Meanwhile, the content of Ni in ferrite was also detected to be clearly lower than in austenite with electron back scattered diffraction (EBSD) and EDS mapping techniques. Therefore, it could be concluded that CE take place selectively on the 2205 DSS surface, the damages were initiated and progressed in ferrite phase prior to in austenite phase.

Abstract: Based on the construction practice of strengthening dam foundation and cross-strait dam end (0+149～0+330) high pressure jet grouting impervious wall of an earth dam, this paper expounds the construction equipment, technological process, construction parameters and construction method of high pressure jet grouting impervious wall construction. By analyzing the impervious wall’s depth, continuity, strength, permeable rate, the quality of the wall is eligible, and its indexes comfort the design requirements. The experiences are useful in similar earth dam reinforcement construction.