Papers by Keyword: Impeller Design

Abstract: Fan impellers are usually designed considering that the pumped air is incompressible and homogeneous, i.e. its density remains constant. When the incompressibility hypothesis can lead to significant errors, as in the case of high pressure fans, the analysis of the air flow can be made by considering that the air undergoes a polytropic process of constant polytropic exponent. In this paper, the concept of polytropic process of variable exponent depending on impeller radius is introduced, in order to better approximate the phenomena that take place inside blade passages. Numerical results obtained for an impeller of a high pressure fan without spiral casing suggest that the pumped air undergoes two different processes: an expansion in the first part of the impeller and the usual compression in the second part. The two processes are reflected in the strong variation of the polytropic exponent, which shows a vertical asymptote where the change of the process takes place. The results also suggest that high pressure fan impellers could consist of two stages, each stage being designed according to the process that takes place inside it: expansion or compression.

Abstract: Compared to centrifugal blood pumps, the high rotating speed of axial blood pumps lead to blood damage more easily. In order to improve blood compatibility of the axial blood pump developed by the authors, traditional method and three-dimensional streamlined method are used for axial impeller design, and rapid prototyping with ABS organic materials are adopted. Finally, hydraulic experiments and hemolysis tests have been conducted. The results reveal that the impeller design and the design parameters (diameter and length) affect the hydraulic performance and hemolysis of the axial pump obviously. The hemolysis index in axial flow impeller pump using traditional method is 0.12, while the minimum value of hemolysis index in the streamlined axial blood pump is 0.06, below the permitted hemolysis value of 0.1.