Papers by Keyword: In Situ EBSD

Abstract: The reverse transformation of austenite from pearlite was observed in-situ by using a sophisticated EBSD system. Quantitative information on the nucleation sites and orientation selection of the austenite was obtained. Initially, the nucleation sites were restricted to high-angle grain boundary (HAB) and all the austenite orientations were selected by Kurdjumov-Sachs (K-S) orientation relationship. Latterly, the constraints were relaxed as new nucleation sites were involved. The γ growth was preferentially into the pearlite grains without K-S relation. Nucleation and growth at HAB edge may contribute to γ coarse grains, whereas nucleation at pre-existing γ boundary is important to grain refinement of γ structure.

Abstract: To investigate grain rotation caused by twinning-detwinning during plastic deformation, experiments using synchrotron high energy X-ray Diffraction (XRD) and Electron Backscatter Diffraction (EBSD) are carried out under in situ compression-tension loading. Comparison between the XRD and EBSD data confirms that the intensity change of diffraction rings in XRD experiment is caused by twining and detwinning. A good agreement of twin fraction values obtained from XRD and EBSD is achieved. This demonstrates that the grains and texture are homogeneously distributed along the normal direction of the sample. In the meantime, it is observed that detwinning can only be activated in a large quantity when the loading reverses into tension from compression in the first loading stage.

Abstract: This study highlites deformation behavior of austenitic and pearlitic steels by in-situ neutron diffraction and 3D/4D EBSD measurement with a particular attention to their hierarchy.In particular stress partitioning in these microstructures is examined from macroscopic as well as microscopic scale length levels, and they are correlated to each other.

Abstract: While electron backscatter diffraction (EBSD) has become an established technique within materials characterization labs around the world, the technique is still relatively young and new applications are continuing to emerge. Automated EBSD or Orientation Imaging Microscopy (OIM) systems are being used in combination with other equipment within the scanning electron microscope (SEM) to perform in-situ measurements. This includes tensile stages for observing changes in local orientation during deformation and heating stages for studying orientation changes arising during recrystallization and grain growth as well as phase transformations. In addition to these temporally three-dimensional studies, spatially three-dimensional studies can be performed by in-situ serial sectioning in microscopes equipped with both electron and focused ion beams. These in-situ techniques are briefly reviewed. The review is followed by a detailed analysis of in-situ heating experiments on copper. The movement of grain boundaries during recrystallization and subsequent grain growth are tracked. The effect of orientation relationships on grain boundary mobility and nucleation are explored. No special relationship with grain boundary mobility was observed. However, twins appear to play a significant role in the nucleation process.