Papers by Keyword: Lens Array

Abstract: In this study, a computer numerical control (CNC) programming software platform for ultra precision machining of optical surfaces was developed based on an MS Windows application framework and openGL. Using cylindrical coordinates, the tool path can be generated based on the polar angle, radius and a linear coordinate of the Z-axis, as well as cutting tool nose radius compensation. A 3D simulation based on tool path generation was developed for machining verification, which largely reduces the oscillation of the machine during the ultra precision machining process. Ultra precision machining of an optical lens array was carried out on a 5-axis ultra precision machining centre using a single crystalline diamond cutter. The experimental results indicated that the oscillation effect can be largely reduced using the cutting tool path using a super steady machining strategy. This software platform is designed as a framework, where the capability and functions can be expanded by adding in more freeform surface packages.

Abstract: Airborne 3-D focal imaging LiDAR can take images in a very short gating time (3~5ns), so it can shield background noise instantaneously. Since the area of laser irradiated surface is about when the detected distance is about 3km, to ensure high imaging quality the laser beam needs to be smoothed before it arrives the ground. In this paper, based on self-developed airborne 3-D focal imaging LiDAR system, a beam homogenization device by using lens array method is presented for the detection range from 1km to 3km. The experimental result indicates that the smoothing rate can reach 89%. Subsequent tests in LiDAR system show that the homogenization device is reliable and effective.

Abstract: Freeform optics fabrication has become one of the hottest topics in optics industry in recent years. Although it still remains a challenge, many have tried different ways of manufacturing it. Some have achieved degrees of success. By means of a Nanotech 350-FG five axis diamond turning machine, we too have successfully produced some prototype freeform optics and lens arrays with Slow Tool Servo and Milling method. The produced freeform optics are mainly for automobile LED headlamps and the lens arrays are for LED illumination. In order to produce the freeform optics, we developed our own DT Slow Tool Servo program which is capable of generating a DT program for diamond turning a universal/general 3D freeform surface. Slow Tool Servo technique and Diamond Milling technique were mainly employed to produce these freeform surfaces. The manufacturing process and machining parameter details will be given in the paper. The two main methods we used will be compared and discussed as well. In measuring the freeform surface, a 3D white light interferometer was used to scan and obtain the surface coordinates. The software made by ourselves enabled us to compare the measure results of the work piece with that of the design drawings. The deviation of our finished forms is within 5 um from that of the nominal. The surface quality Rq is about 10 nm. Measuring equipment and methodology will also be discussed in the paper.