Papers by Keyword: Magnetic Shape Memory (MSM)

Abstract: The most extensively studied Heusler alloys are those based on the Ni-Mn-Ga system. However, to overcome the high cost of Gallium and the usually low martensitic transformation temperature, the search for Ga-free alloys has been recently attempted, particularly, by introducing In, Sn or Sb. In this work, Mn50Ni40In10, Mn50Ni34In16, Ni50Mn36-xIn14+x (x = 0, 0.5, 1, 1.5) and Ni50Mn37Sn13 ribbons has been obtained by melt spinning. We outline their structural and thermomagnetic behavior. Columnar grains and preferential orientation has been obtained. The martensitic, Tm, and the Curie, TC, temperatures of the ribbons are lower than those of the bulk samples with similar compositions. This effect is probably due to the ribbons small and constrained grains. For it, a large under-cooling is necessary for the martensitic transformation. The decrease of TC in the ribbons could be associated with the increased degree of quenched-in short-range disorder around defects.

Abstract: In the shape memory alloys (SMAs) the thermal triggering induces reversible dimensional change by the phase transformation – these materials may also be ferrior ferromagnetic, however, here only the ferromagnetic SMAs are discussed. In certain SMAs the austenitemartensite phase transformation is influenced by the magnetic field as either austenite or martensite is promoted by the field and this is exploited for the dimensional changes. However, in the magnetic shape memory (MSM) alloys no phase transformation occurs as the remarkable dimensional changes take place by the twin variant changes in the martensitic phase activated by the external magnetic field at constant temperature. In addition to the phase transformation or magnetic shape memory effect, the applied magnetic field may also result in the conventional magnetostriction (MS), enhance the superelasticity (magneticfieldassisted superelasticity MFAS) or induce the giant magnetocaloric effect (GMCE). Certain alloys such as NiMnGa may even be multifunctional showing more than one of these effects. The present paper gives an overview of the different types of the magnetically activated SMA alloys, their properties as well as their potentials for applications in the frameworks of the recent studies.

Abstract: We report on strain measurements in Ni-Mn-Ga, Ni-Mn-In, Ni-Mn-Sn and Ni-Mn-Sb polycrystalline alloys as a function of temperature and magnetic field. Experiments are carried out in the austenitic and martensitic phases of the alloys. It is shown that in the cubic phase the magnetostrain is similar for all systems but by contrast very different behaviour is found when a field is applied in the martensitic phase. In the latter case, magnetic shape memory and magnetic superelasticity is obtained for Ni-Mn-Ga and Ni-Mn-In, respectively. The physical reasons for the different behaviour are discussed.