Papers by Keyword: Magneto-Rheological (MR) Damper

Abstract: The magnetorheological (MR) damper is the newest approach to replace the traditional passive damper which cannot change their dynamics in response to different operating conditions of the aircraft landing gear. This paper presents the simulation study of a semi-active controller for a landing gear equipped MR damper. Furthermore, a new method combined skyhook control with force control, called hybrid control, is developed to improve the performance of the MR damper landing gear. Finally, the numerical simulation result of the landing gear using SIMSCAPE-Simulink is discussed.

Abstract: A novel intelligent driver based on digital signal controller (DSC) has been put forward for magneto-rheological (MR) damper. The working principles of MR damper were described, as well as the hardware circuit scheme of signal condition and MR damper driver etc. on account of TMS320F28335 DSC. A hierarchical control algorithm was designed and the studies for the performance of the driver were conducted. The results suggest that the driver could provide accurate drive current for MR damper, and meanwhile the respond time is less than 2ms, which can meet the drive requirements of MR damper.

Abstract: In order to improve recoil mechanism’s buffering function of automatic weapon, using Newton’s second law, its recoil movement is analyzed and design model of magneto-rheological (MR) damper under impact loads is built. Structure parameter and control strategy are defined. Dampers’ characteristic curves at different magnetizing currents and different recoil speeds are tested on a damper indicator test bench. Some weapon’s recoil forces are artificially computed. The research results indicate that MR dampers have a perfect damping plateau effect. Recoil force of automatic weapon will be reduced by a big margin using the property that MR fluid can change at applied magnetic to control damping rules.

Abstract: In this paper, the Box–Cox transformation-based annealing robust fuzzy neural networks (ARFNNs) are proposed for identification of the nonlinear Magneto-rheological (MR) damper with outliers and skewness noises. Firstly, utilizing the Box-Cox transformation that its object is usually to make residuals more homogeneous in regression, or transform data to be normally distributed. Consequently, a support vector regression (SVR) method with Gaussian kernel function has the good performance to determine the number of rule in the simplified fuzzy inference systems and initial weights in the fuzzy neural networks. Finally, the annealing robust learning algorithm (ARLA) can be used effectively to adjust the parameters of the Box-Cox transformation-based ARFNNs. Simulation results show the superiority of the proposed method for the nonlinear MR damper systems with outliers and skewness noises.

Abstract: Magnetorheological fluid (MR fluid) has been widely used in the industrial fields, especially in the machinery, automobile, national defense and construction industries. Most of the researches of the Magnetorheological Damper only utilized device to examine the effects of different levels of voltage, amplitude and frequency on energy reduction. They find a combination of the number of circles of wire, damping tubes, enameled wire sleeves for liquid of MR damper controlled to increase the damping force. This study uses different ways to solve the problem. We think outside the box and apply the concepts and technology of systematic innovation method to improve the structure of the MR damper for increasing the effectiveness. This study uses the contradiction matrix, 39 engineering parameters, and 40 inventive and innovative principles to identify the areas of improvement to address the exist problems. Regarding the decrease of the magnetic field acting force due to increase of the moving distance and the effect on the magnetorheological damper efficiency. Finally, we propose an improved design of the MR Damper.

Abstract: This paper presents vibration control responses of a multi-story structure installed with a semi-active magneto-rheological(MR) damper. As a first step, performance characteristics of three different working modes for MR fluid are compared and the mixed mode type of MR damper is chosen as an optimal candidate for the vibration control of the multi-story structure. An appropriate size of the mixed mode MR damper is devised and manufactured on the basis of the field-dependent Bingham model of the MR fluid which is commercially available. The damping force of the mixed mode MR damper is evaluated with respect to the excitation frequency at various magnetic fields. After formulating the governing equation of motion for the small scaled three-story structure associated with the MR damper, the linear quadratic regulator(LQR) controller to effectively suppress unwanted structural vibrations is designed by imposing semi-active actuating conditions. The control algorithm is then empirically implemented under earthquake conditions and the control responses of the horizontal relative displacement and acceleration are evaluated in time and frequency domains through computer simulations.

Abstract: In this paper, the magneto-rheological damper is installed in the seat, using semi-active control theory and methods, dynamics mathematical model of the magneto-rheological damper seat is established, the fuzzy semi-active controller based on the magneto-rheological is designed, and then the simulation analysis on the system is completed by the software of MATAB/Simulink. The results of simulation show that the semi-active seat based on the magneto-rheological can markledly suppress the vibration acceleration and improve the ride comfort of the seat.

Abstract: The damping force of Magnetorheological damper (MRD) can be controlled in a certain range by applying a steady magnetic field to reduce vehicle suspension vibration effectively. This paper presents the analysis of the damping characteristics of the twin-tube MRD, and the design of embedded control system for Twin-tube MRD used to semi-active vehicle suspension. The laws of varying damp force with current, displacement and frequency are investigated by testing for the damper, for instance the relationship curve of damping force vs. current. The control system is composed of controllable current driver and electrical control unit (ECU). ECU is developed based on MC9S12XDP512 chip. Signals that ECU acquired come from three types of sensor, i.e. digital temperature sensor, MEMS acceleration sensor and laser distance sensor embedded in MRD. The sampling frequency may exceed 400Hz. The programming is carried out in accordance with the state data acquisition and the improved On-Off control algorithm．Aiming at the high time response requirement of the MR damper, a Pulse-width modulation (PWM) current driver was designed. The hardware solutions drive circuit, interface circuit as wel1 as the software design of control system are discussed in detail. The proposed designed system has been put in actual MRD controlling application, whose test results prove its fast current response and high precision.

Abstract: For the complex nonlinear property and a lot of regulatory parameter, it is difficult to design a reasonable magneto-rheological (MR) damper by simply process or experience. To solve this problem a structural optimization has been presented in this article. Three stages have been discussed in the article. By calculate the flux of MR fluid based on the yield stress of MR fluid, selected common design targets such as maximal output damping force, dynamic range and consult volume of damper has been presented in formula respectively with the parameter according to damper structure. By approximate the magnetic circle, the power of excitation also has been presented as an expression of structure parameter. An optimum method named multi-goal attach has been applied to solve the optimum problem. Finally some confirmation and experiment results have been presented. The experiment results indicated that the method presented in the article was effectively.

Abstract: Magneto-rheological damper is an adjustable damping smart drive. Its advantage lies that the magneto-rheological fluid can rapidly and reversibly change Newtonian fluid with good liquidity into plastic solid with high viscosity and low liquidity in the millisecond time. And then it can be easily combined with control. MR damper has obtained a certain application in vibration control of automotive, machinery, construction and other areas. In this paper, the writer focus on describing control strategy present situation and the advantages and disadvantages of various control strategies of magneto-rheological damper based on impact load. And he makes a more detailed analysis of difficulties and future trends of magneto-rheological damper based on impact load.