Papers by Keyword: Material Layer

Abstract: In order to study the application of fluidized bed process for the gas quenching steel slag(GQSS) slag-iron separation, according to the principles of fluidized bed material separation, based on the all GQSS, this paper researches the influence law of fluidization characteristics and the fluidization performance of GQSS after adding 20% (calculated by volume) iron grains. The experiment uses single hood fluidized bed as experiment device, studies the GQSS and iron grains of critical fluidization and slugging fluidization of other characteristics in the fluidization process, and determinates the packing density in interior and exterior of the tube. The results show that: when the material is all GQSS, the appropriate fluidization thickness of material layer is 300~400mm ; after adding 20% iron grains in the tube, the appropriate fluidization thickness of material layer is 350~400mm. The results of this paper on GQSS slag-iron separation have important theoretical significance.

Abstract: This paper focus on the motion simulation and visualization of the material particles in the operation of the spin vibration screening using DEM(Discrete Element Method). Based on analysis of the simulation results, some conclusions are made which provide the theory basis in order to design the screen parameters reasonably. Finally some experiments are carried out in order to verify the correctness of the simulation.