Papers by Keyword: Methyl Trichloro Silane (MTS)

Abstract: Several 2D SiCf-SiC and Cf-SiC composites were fabricated using isothermal and isobaric Chemical Vapour Infiltration (ICVI) process. The reinforcements used in the above composites are Nicalon CG fabric and C fabric. Prior to SiC matrix infiltration, BN and C interfaces were applied to the fibre by using the pre-cursors Boron Trichloride (BCl3)-Ammonia (NH3) and Methane (CH4) respectively to improve the mechanical performance of the composites. SiC matrix was infiltrated by the decomposition of Methyl Trichloro Silane-CH3SiCl3 (MTS) in the presence of hydrogen at the temperature ranging from 950°C to 980°C. H2/MTS flow rate ratio used for this study is 16:1.An appropriate temperature for uniform SiC infiltration without any premature pore closures have been obtained by kinetic experiment. Density and porosity of the above composites were measured using the method described by EN1389:2003. Various mechanical characterizations like flexural strength, tensile strength and fracture toughness of the SiCf-SiC composites were also studied. The SiCf-SiC composites were subjected to thermal exposure (1000°C for 100 hr in an oxidizing atmosphere) and tensile strength results obtained before and after thermal exposure were compared. RT Flexural Strength and Fracture Toughness (KIC) of composite-SQAV (SiCf/C/SiC) and composite-SQBII ( SiCf/BN/SiC ) are measured by 3-point bending and results were compared. RT Flexural strength of Cf-SiC composites with C interface of two thicknesses were measured and