Papers by Keyword: Micro Machine Tool

Abstract: In order to machine the complex free surface, in this paper, NC interpolation of any complex surface is realized used the recursive reconstruction algorithm. The interpolating errors of this algorithm are controllable, and its applicability is relatively wide. Then, these NC codes of the complex human’s free surface are obtained with data exchange of the manufacturing module in the software UG, and machining simulation is obtained used NC codes. Finally, these NC codes are entered into the NC micro-machine tool, which is controlled by the PMAC and developed by ourselves, and the experimental research of the human’s free surface has been finished on this machine tool. The experimental results show that the NC interpolation accuracy of this recursive reconstruction algorithm is very high, and the machining simulation and machining experiments of the complex human’s surface are completely consistent. The study result shows that the complex surface molding is smooth and continuous, and the machined surface is satisfactory.

Abstract: In order to machine complex free surface parts, a micro NC (numerical control) three-dimensional machine tool is developed, integrated the PMAC control. Based on this NC machine tool, the influencing of the technological and tool’s parameters on machining accuracy of micro complex surface parts are analyzed, and the cause to lead to the machining errors is explained. Therefore, the cutting parameters and tool geometry parameters to machine micro complex surface, such as the human’s face, can be selected optimally. Finally, the micro complex human’s face is machined on this developed micro machine tool under optimal parameters. The experimental results show that the machined surface is smooth and continuous. The machined quality is satisfied.