Papers by Keyword: Microstructure-Property Relationships

Abstract: It is well known that the properties of materials are a function of their microstructural parameters. The FEM is a good selection for studies of three-dimensional microstructure-property relationships. In this research, the elastic-plastic micromechanical response of the particle volume fraction of two-phase materials have been calculated using a commercial software package of the FEM, some new knowledges on the microstructure-property relationships have obtained.

Abstract: This article discusses the fundamental principles associated with the selection of aluminium alloys for specific purposes, alloy design & heat treatment procedures and development of key microstructures responsible for obtaining desired properties in selected wrought Al alloys for aerospace and defence applications. Influence of micro/trace additions of suitable alloying elements on the microstructure and properties of high strength 7xxx series Al alloys is further highlighted.

Abstract: Silicon nitride is one of the major structural ceramics that has been developed following many years of intensive research. It possesses high flexural strength, high fracture resistance, good creep resistance, high hardness and excellent wear resistance. These properties arise from the processing of the ceramic by liquid phase sintering and the development of microstructures in which high aspect ratio grains and intergranular glass phase lead to excellent fracture toughness and high strength. The glass phase softens at high temperature and controls the creep rate of the ceramic. The purpose of this review is to examine the development of silicon nitride and the related sialons and their processing into a range of high-grade structural ceramic materials. The development of knowledge of microstructure–property relationships in silicon nitride materials is outlined, particularly recent advances in understanding the effects of grain boundary chemistry and structure on mechanical properties. This review should be of interest to scientists and engineers concerned with the processing and use of ceramics for structural engineering applications.