Papers by Keyword: Multi-Components Hydration Model

Abstract: Autogenous shrinkage is the term for the bulk deformation of a closed, isothermal, cement-based material system not subjected to external forces. It is associated with the internal volume reduction of cement/water mixture in the course of the hydration process. However, addition of blended components to cement, especially such as fly ash or silica fume, for the high-performance concrete will lead to a densification of the microstructure. The autogenous shrinkage deformation will increase and the following autogenous shrinkage crack will do harm to durability of concrete structure. In this paper, numerical simulation is suggested to predict autogenous shrinkage of high performance cement paste. The simulation is originated from a multicomponent hydration model. The numerical program considers the influence of water to cement ratio, curing temperature, particle size distribution, cement mineral components on hydration process and autogenous shrinkage. The prediction result agrees well with experiment result.

Abstract: Fly ash and granulated blast-furnace slag, which are used as blends of Portland cement, are waste materials produced in electric and energy industry. Due to excellent durability, low heat of hydration, energy-saving, resource-conserving, and generally less expensive than ordinary Portland cement, blends Portland cements is used increasingly in construction industry. Both ecology benefit and economic benefit can be achieved by using blended Portland cement. Addition of blended components to cement, especially such as fly ash or silica fume, will lead to a densification of the microstructure. The autogenous shrinkage deformation will increase and the following autogenous shrinkage crack will do harm to durability of concrete structure. In this paper, based on the multi-component hydration model, a numerical program is built to predict autogenous shrinkage of ordinary Portland cement and blended Portland cement. The numerical program considers the influence of water to cement ratio, curing temperature, particle size distribution, cement mineral components on hydration process and autogenous shrinkage. The prediction result agrees well with experiment result.

Abstract: With the development of concrete industry, the necessity for utilizing waste materials and decreasing overall energy consumption is becoming increasingly obvious. Fly ash and granulated blast-furnace slag, which are used as blends of Portland cement, are waste materials produced in electric and energy industry, and concretes made with them can have properties similar to ones made with pure Portland cement at lower cost per unit volume. By using blended Portland cement, both ecology benefit and economic benefit can be achieved. Due to the pozzolanic reaction between calcium hydroxide and blended components, compared with ordinary Portland cement, hydration process of blended Portland cement is more complex. In this paper, based on a multi-component hydration model, a numerical model which can simulate heat evolution process of blended Portland cements is built. The influence of water to cement ratio, curing temperature, particle size distribution of cement paste and blended Portland material, and cement mineral components on heat evolution process is considered. The prediction result agrees well with experiment result.