Papers by Keyword: New Design

Abstract: Many research studies have been carried out to develop small capacity absorption cooling systems as an alternative to conventional vapour compression refrigeration (VCR) systems with respect to performance and economic aspects. The aim of this work is to design a solar assisted single effect absorption cooling system of 5.25 kW cooling capacity to cool a room having floor area of 15 m². Based on the design, an experimental setup is constructed and operated by supplying heat to the generator using solar energy. The performance analysis of the cooling system is carried out by measuring the various operational parameters. The minimum cooling temperature of 16^°C is observed in the evaporator and maximum COP of 0.9 is obtained when the hot water storage tank reaches 90^°C. As per this new design, the operational cost is minimized and the COP obtained is slightly higher when compared to that of earlier similar works.

Abstract: The aim of this work is to design and fabricate solar assisted single effect absorption cooling system of 5.25 kW cooling capacity to cool a room having floor area of 15m². The design of the major components of the cooling system like generator, condenser, evaporator, absorber and solution heat exchanger are described in this paper.

Abstract: The grade 590MPa high strength steel for construction machine and mine machine can be produced in mass and at lower cost with optimization of chemical composition and production process. The thickness of steel plates is from 6 mm to 60 mm. The microalloy system can be designed as Nb-V,Nb-Ti or Nb-Ti-V. Due to application of controlled rolling and controlled cooling (thermal mechanical control process TMCP) the properties of steel plates are perfect. Test and process simulation be conducted in lab rolling mill. The results and process were transplanted to middle plate mill and heavy plate mill, the process parameter can be matched well and appropriately, the production process is smooth and properties of steel plates are excellent and stable. The new manufacture technology for production of 590MPa high strength steels is opened up. The output of 590MPa high strength steels has been reached more than 81000 tons every year in Jinan Iron and Steel Co. Ltd. and it meet the needs of market preferably. The application of this type high strength steel can create a great of economy and social profits.

Abstract: When using programmed machine tools many steps of a shaft are machined in one operation. Many shafts are not rigid enough and for the purpose of achieving high accuracy and productivity it is necessary to use an automatic follow rest and dimension control. The problem is complicated by necessity of an automatic reset in an operation from one step of a shaft to the other. The new scheme of a device is proposed in the paper that enables simultaneously to support the shaft being machined and control its dimensions. The work principle of a device is that the shaft is supported in a radial direction by a movable slider. Diameter of the shaft neck is measured by two levers turning round their axes driven by the movable slider with patterns. The main idea is that at motion of the slider equal to change of the shaft neck diameter measuring surfaces of levers are constantly tangent to diametrical surface of the workpiece while the slider is supporting the workpiece in radial direction, opposite to the cutting force. Dimension of a shaft neck is evaluated as a sum of motion value of a slider and deviation from tangent of lever measuring surfaces. Theoretical background of principle schemes and the work scheme of a device are presented in the paper.