Papers by Keyword: Non-Contact Strain Measurement

Abstract: The paper presents the results of strain measurement using two methods: videoextensometry (ME46) and digital image correlation (DIC)-ARAMIS. ME46 - allows measuring and monitoring the major and minor strain on a planar surface of a loaded object [1]. Experimental equipment uses a CCD camera for monitoring the process. The software calculates the displacements of contrast dots and subsequently the strain components are obtained. Another method for non-contact measurements is DIC technique; the measurements are done using three-dimensional image correlation system. The system uses two digital high-speed cameras providing a synchronized stereo view of the specimen where speckles are arranged on the surface. The results show the complete strain field during the tests, including details of the strain field when necking develops prior to the failure [2]. Experimental results obtained on ultra high strength automotive steels DP 1000 and 1400M grades during static tensile test are presented in the paper. The outputs of both are deformation maps. Advantages and disadvantages of both methods are compared.

Abstract: Driven by the unavailibility of commercial test equipment for tensile and creep testing at temperatures up to 3000°C a measuring system has been developed and constructed at the University of Applied Sciences, Jena. These temperatures are reached with precision by heating samples directly by electric current. Contact-less strain measurements are carried out with image processing software utilizing a CCD camera system. This paper covers results of creep tests which have been conducted on TZM sheet material (thickness 2 mm) in the temperature range between 1200°C and 1600°C. It is the aim of this work to show the influence of heat-treatment conditions on creep performance in the investigated temperature range.