Papers by Keyword: Orthogonal Milling

Abstract: Shear angle and friction angle are the two characteristic parameters in orthogonal cutting model. This paper investigated effects of feed per tooth on shear angle and friction angle in orthogonal milling of titanium alloy Ti6Al4V by experimental approach. Three different straight tooth milling tool with different rake angles are used in this research. Experimental results reveals that in orthogonal milling of Ti6Al4V alloy, shear angle will decrease with increase of feed per tooth and friction angle will increase with increase of feed per tooth. And then variation of shear angle and friction angle affect the values of force coefficients. The experimental results provide deep understand of basic physical phenomenon in milling process and sheds light on more accurate cutting force modeling.

Abstract: Frequently, to validate FEM simulations of the cutting process it is compared the predicted results with the experimental cutting forces. In addition, other parameters are measured and it is possible to predict the chip geometry in some particular conditions. This paper presents a new development of the photogrammetry and its applications in the study of the chip geometry. In the orthogonal milling case, it is possible to obtain a 3D model of the deformed chip employing photogrammetry digitization techniques.