Papers by Keyword: P-N Diode

Abstract: Modeling and simulation of 3C-SiC power devices such as MOSFETs and diodes requires a model for the breakdown field that is consistent with the Monte-Carlo-simulated ionization rates of electron and holes and supported by experimental results. The challenge one faces is the limited number of publications reporting such calculations and the limited availability of high-quality ionization breakdown data for 3C-SiC diodes. We therefore performed a series of 2D simulations of both n-type and p-type Schottky diodes and p⁺-n diodes that confirms the general breakdown field trend with doping density obtained from experiments. We uncovered a difference between n-type and p-type diode breakdown behavior, identified the discrepancy between the calculations and the experimental data, and extracted a simple breakdown field model, useful for further 3C-SiC device design and simulation.

Abstract: In this work, we demonstrate the stable operation of 4H-silicon carbide (SiC) p-n diodes at temperature up to 600 °C. In-depth study methods of simulation, fabrication and characterization of the 4H-SiC p-n diode are developed. The simulation results indicate that the turn-on voltage of the 4H-SiC p-n diode changes from 2.7 V to 1.45 V as the temperature increases from 17 °C to 600 °C. The turn-on voltages of the fabricated 4H-SiC p-n diode decreases from 2.6 V to 1.3 V when temperature changes from 17 °C to 600 °C. The experimental I-V curves of the 4H-SiC p-n diode from 17 °C to 600 °C agree with the simulation ones. The demonstration of the stable operation of the 4H-SiC p-n diodes at high temperature up to 600 °C brings great potentials for 4H-SiC devices and circuits working in harsh environment electronic and sensing applications.

Abstract: This paper presents the effect of X-ray irradiation on the electrical properties of Pt-doped P-N diode with X-ray energy 70 keV for 205 seconds. The results show that the radiation affected both reverse and forward current characteristics of P-N diode. The forward current is increased about 3 orders after radiation, while the leakage current is increased slightly after irradiation. Moreover, build-in voltage value is also changed after irradiation. The cause of parameters changing can be analyzed from carrier lifetime and series resistance. It can be seen clearly that X-ray irradiation technique are significant and can be used to improving electronic devices.

Abstract: Quantitative efficacies of several methods for stacking fault (SF) reduction are evaluated using Monte Carlo (MC) simulation. SF density on a 3C–SiC {001} surface depends on interactions of adjoining SFs: annihilation between counter pairs of SFs and termination by orthogonal SF pairs. However, SFs are not entirely eliminated when growth occurs on undulant-Si and switch back epitaxy (SBE) due to spontaneous SF collimation that suppresses the annihilation probability of counter SFs. The MC simulation also reveals the efficacy of SF reduction method which includes the growth of 3C–SiC on finite area bounded by side walls. One can theoretically reduce the SF density below 100 cm^-1 on 3C–SiC {001} surface. A practical way for eliminating the SF by termination at side walls is demonstrated, and it clearly exhibits that the SF density can be reduced under 120 cm^-1.